Menu
Your Cart

42 Lead Screw Linear Stepper Motor 1.5A 40mm 300mm Rod For 3D Printer

42 Lead Screw Linear Stepper Motor 1.5A 40mm 300mm Rod For 3D Printer
  • Stock: Out Of Stock
  • Brand: xcluma
  • Model: BE-001467
  • Weight: 800.00g
  • MPN: BE-001467
Rs2,010.00
(GST +18%Extra)

FEATURES:

  • Drive mode: Constant current chopper drive
  • Excitation mode: 2-phase excitation (2-phase four-run), can forward and reverse rotation
  • Steering: AB-BC-CD-DA sequentially energized
  • Rated current (single-phase): 1.5A DC
  • Power supply voltage: 12-36V
  • Step Angle: 1.8 °
  • Insulation class: B class insulation


PARAMETER:

(Test conditions: test parameters measured in normal atmospheric conditions)
 

  • Ambient temperature: -20 ~ 50 ℃
  • Relative humidity: 90% MAX
  • Mounting position: Shaft horizontal or vertical installation.
  • Winding DC resistance (25 ℃): 1.6Ω ± 10%
  • Winding inductance: 3.8mH ± 20%
  • Location torque: 18mN.m REF.
  • Holding torque (two interlinked rated current): ≥420mN.m (I = 1.5A)
  • The maximum load starting frequency: ≥1300pps
  • The maximum no-load operating frequency: ≥8000pps
  • Temperature: <80K
  • Step angle accuracy: 1.8 ° ± 5%
  • Moment of inertia: 57g.cm2
  • Motor weight: 0.39Kg / PC REF.
  • Insulation resistance: Betewwn motor stator core and terminal cold insulation resistance should be greater than 100 m Ω (used with DC500V measurement).
  • Dielectric strength: Between the stator core and the terminal should be able to withstand AC600V / 1S without breakdown, leakage current is less than 1mA.
     

Write a review

Please login or register to review