Out Of Stock
5A 75W USB CC CV DC-DC LED DRIVE LITHIUM CHARGER STEP-DOWN MODULE
- Stock: Out Of Stock
- Brand: xcluma
- Model: BE-000063
- Weight: 35.00g
- MPN: BE-000063
Rs147.00
(GST +18%Extra)
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.
Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm
11.Weight: 39g
Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.
2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)
3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
You may also like
0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the pro..
Rs205.00
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power su..
Rs102.00
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters:&nbs..
Rs775.00
12V/24V to 5V dual socket 3A DC-DC car charging lithium battery charging board charger module + protection dual functionProduct Information:DC-DC..
Rs119.00
Hot
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous..
Rs413.00
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
· ..
Rs61.00
400W 15A Step-up Boost Converter LED Driver 8.5-50V to 10-60V Voltage Constant Current ModuleDescription:Module name :400W boost constant current modu..
Rs454.00
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, outpu..
Rs775.00
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A ..
Rs73.00
Hot
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are ..
Rs26.00
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX C..
Rs58.00
Out Of Stock
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car Charger
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging managemen..
Rs533.00
Out Of Stock
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection A..
Rs420.00
Out Of Stock
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range：6-40.00VOutput Power Range：0-160WOutput v..
Rs1,311.00
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not excee..
Rs17.00
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed..
Rs21.00
Hot
Input voltage: 6v-40v output voltage: 5v output current: 3a switching frequency: 150khz conversion efficiency: 92 percent working temperature: -40 to ..
Rs85.00
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v e..
Rs35.00
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, batt..
Rs322.00
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8m..
Rs604.00
Random Products
DESCRIPTION:
Universal receiver.
100% Brand New
Module Properties: non-isolated constant current and voltage module
Rectification: non-syn..
Rs433.00
Hot
Out Of Stock
Linear Magnetic Force Hall Sensor KY-024High sensitivity IR receiverExtremely sensitive to wave between 760-1100nmPower supply indicator lampComparato..
Rs35.00
DESCRIPTION:
One side of the adapter board is SOP24 (1.27mm pitch) to DIP24 (2.54mm pitch), the other side is SSOP24 / TSSOP24 (0.65mm pitch) to DI..
Rs44.00
STC-3028 STC3028 Digital Temperature Humidity Controller Home Fridge Thermostat Hygrometer Control Switch AC 110 220VSpecifications:Be able to control..
Rs1,014.00
Out Of Stock
FEATURES:
Power: 500mW
SPECIFICATIONS:
For use in stabilizing and clipping circuits with high power rating. ..
Rs1.00
W25Q32 32Mbit 4MByte large capacity FLASH storage module SPI interface storage moduleProduct parameter:Product capacity: 32M-BIT/4M-BYTEClock frequenc..
Rs63.00
DESCRIPTION:
500mA
5mm X 20mm
Glass Body
Fast Blow Type
Consistant Performance
Wide Operating Temperature..
Rs5.00
Out Of Stock
Description:
The HT16K33 is a memory mapping and multi-function LED controller driver. The max. Display segment numbers in the device is 128 patter..
Rs251.00
DESCRIPTION:
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
FEATURES:
Operatin..
Rs189.00
DESCRIPTION:
Connector Type: RJ11
Gender: Plug
No. of Contacts: 4,
No. of Ports: 1
Contact Termination: IDC / IDT
Contact Resistance: ..
Rs5.00
DescriptionPush-pull, linear motion, open frame, plunger spring reset, DC electromagnet.DC Solenoid electromagnets are mainly used in vending machines..
Rs522.00
MG995 MG996 steering gear pan and tilt mount mechanical robot servo mount setmultipurpose brackets*1long U bracket*1screws and bear..
Rs165.00
Out Of Stock
SPECIFICATION:
Meter: 5 x 8 x 3.5cm [2 x 3.2 x 1.5\"]
Probe length: 21cm [8\"]
Bronze probe diameter: 4.8mm
silver probe diameter: 5.1mm
..
Rs205.00
Out Of Stock
DESCRIPTION:
1, the decoder uses PCM2704 chip, laser dark word.
2, connected to the computer without driver, compatible with XP and WIN7,
3, ..
Rs155.00
Description• Built-in synchronous switch step-down converter chip• Input voltage range: 4.5V to 32V (The input voltage must be higher than the output ..
Rs446.00
Single Side Copper Prototype PCB Universal Board 12X18 12 * 18 mm - 1.6mm thick..
Rs123.00
TTP223B Digital Touch Sensor capacitive touch switch module for Arduino..
Rs20.00
Out Of Stock
DescriptionThis DC 12V Electromagnetic lock works as the circuits disconnects, and it will unlock as the instant power-on.It is steady, durable, and e..
Rs283.00
Description
·
This kit comes with round shape chassis, Motors, wheels and all required
assembly parts t..
Rs515.00