Menu
Your Cart

Dual Micro USB 3.7v to 5V 2A Mobile Power Bank DIY 18650 Lithium Battery Charger PCB Board Boost Step Up Module

Dual Micro USB 3.7v to 5V 2A Mobile Power Bank DIY 18650 Lithium Battery Charger PCB Board Boost Step Up Module
  • Stock: Out Of Stock
  • Brand: xcluma
  • Model: BE-001943
  • Weight: 12.00g
  • SKU: BE-001943
  • MPN: BE-001943
Rs144.00
(GST +18%Extra)
1. LED lights show the power, non-working state of intelligent automatic shutdown;

Built-in lithium battery protection IC, over-current, overvoltage, undervoltage protection;
Dual USB output.
 
2. Product basic parameters:
Input port: MicroUSB (Andrews mouth)
Input requirements: 5V constant voltage power supply can be done to charge the input power supply, the most matching charger for 5V1A above
Output port: USB
Output parameters: 5V1A/5V2A
 
 
3. Requirements for rechargeable batteries:
Available battery: 18650 battery, cell phone battery, flat battery, MP3 battery, etc. 3.7V-4.2V polymer lithium battery can be single section (chip) power supply, can also be multi-section (chip) parallel power supply (not in series, not in series ). (Note: increase the capacity in parallel, the series is to increase the voltage, can only be used in parallel!)
Can be parallel 2-6 18650 battery.
Not available Battery: dry batteries, batteries, 1.2V rechargeable batteries, nickel-metal hydride batteries, 3.2V lithium iron polymer lithium batteries.
 
 
4. Product installation should pay attention to the following points:
the battery should be in parallel, the voltage between 3.2-4.2V to work, 18650 flat and polymer batteries can be;
the battery is connected to the motherboard B + negative access B-, installed anti-burning motherboard;
the old and new batteries, models, inconsistent battery brand can not be mixed.
 


Write a review

Please login or register to review