Features• Power Input: 12 V or 24 V
• Dimensions: 214 mm x 214 mm
• FR-4 Laminate 1.6mm
• 2 layer, 35m copper
• Red Solder mask - both sides
• White Silkscreen - both sides
• Copper plated holesDescription
• MK2B 3D printers Dual Power PCB Heated
• This heat bed has a dual power capa..
3D Printer Parts 1M 1meter HT-NTC100K NTC100K Thermistor Temperature Sensor For High Temperature Filament 350 DegreesSpecifications:Negative Temperature Coefficient (NTC) Thermistor Temperature measurement head size: 3 * 15mm1. Upgrade from the original ordinary temperature probe directly expos..
Material: PolyimideWidth: 50mmLength: about 33m /100ftHeat resistance: about 280°cHigh insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanicallyThis tape has good adhesiveness, high temperature resistance, solvent resistance, cannot be permeate tin, not adhe..
DescriptionMainly used for the linear axis up, both sides of the wall can be bolted in machinery,so that the linear bearing or slider, in axis movement back and forth, and complete mechanical function.rust protection, acid-resistingEasy to install and useSpecifications:• Material: Alumin..
Length: about 33m /100ft.
Heat resistance: about 280°c
High insulation, high temperature resistance,
acid and alkali-resistance, low electrolysis, mechanically
This tape has good adhesiveness, high
temperature resistance, solvent resistance, c..
Aluminum GT2 16Teeth 5mm Bore Timing Belt Pulley Flange Synchronous Wheel for 3D PrintersDescription:- Material: Aluminum Alloy- Teeth: 16T; Bore: 5mm- Suits to the timing belt which is 6mm width.- 16 contact with the tooth side which minimizes the risk of the belt slipping.- Package Content: 1 X GT..
20teeth GT2 Timing pulley Bore 5mmHigh-Quality AluminiumExcellently MachinedDurable and practicalMinimizes the chance of the belt slippingEasy to useGear teeth: 20 or 16Model: 2GTBore size: ø 5mmSuitable for: 2GT 10mm width belt..
20teeth GT2 Timing pulley Bore 8mmThis is GT2-8mm Belt Width 20Teeth 8mm Bore Timing Pulley with 20Teeth, 4mm bore diameter. Aluminum 16T GT2 timing pulley has a high-quality shiny surface appearance and robust construction, longer working life. The rounded teeth of this tooth and belt are engaged t..
This 625ZZ 5x16x5 shielded miniature ball bearing has deep groove
geometry for high speeds and supporting both radial and axial loads.·
Its chrome steel construction makes it durable and resis..
CNC 3D Printer Parts Accessory Reprap pololu A4988 Stepper Motor Driver Module with Heatsink for ramps 1.4A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper mot..
3D Printer Heated Bed Power Module High Current 210A MOSFET Upgrade RAMPS 1.4Safe and reliable way to handle high current heate bed on 3D PrinterEasy to install and connect with supplied connection diagramIt will not overheat under normal loadActive cooling is not required but recommendItem Type: 3D..
42 CH Stepper Motor Driver Expansion Board for DRV8825 A4988 for UNO R3 3D PrinterFeatures:On-board DIP switch, you can easily adjust the drive segmentsTerminal power connector for easy connection drive powerCompatible with 12 / 24V drive schemeSuitable for 42 stepper motor drive, for 3D printers an..
new version Opto Optical Endstop End Stop Switch For CNC For 3D PrinterFeatures:The optical endstop is a reliable endstop / switch solution for any type of 3D printers and other CNC and/ or 3D tools.Our product is based on the original design found HERE and is a improvement of Gen7 Endstop (OptoEnds..
Description• This product is resistant to high temperature and stable,
used for GT2 timing belt fixing.
• Small size, convenient to use, easy to carry and store with good performance
• Made of high-quality aluminium alloy, with faster heating and better heat
• A large number, c..