Menu
Your Cart

Dual DC Stepper Motor Drive Controller Board Module TB6612FNG

Dual DC Stepper Motor Drive Controller Board Module TB6612FNG
  • Stock: In Stock
  • Brand: xcluma
  • Model: BE-001512
  • Weight: 3.00g
  • MPN: BE-001512
Rs299.00
(GST +18%Extra)
DESCRIPTION:
  • 100% Brand New and High Quality
  • The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak).
  • Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
  • The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.
  • Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC.
  • The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
  • Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
  • Standby control to save power
  • CW/CCW/short brake/stop motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins Filtering capacitors on both supply lines

SPECIFICATION:

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak)
  • Net Weight: 5 g
  • Dimensions: 20mm x 20mm

Write a review

Please login or register to review