DESCRIPTION:The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum. Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the response of the human eye. And because the T..
SPECIFICATION:Stainless steel sheath and waterproof
Measurement range: -20 to 105 C
Length of wire:1 meter
Size of probe: 5 x 25 mm
Output 2 wires
Type: NTC 10k 1% 3950
measure environmental temperatures using arduino ADC and this 10k NTC LINK
Resistance to temperature conversio..
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.Technical Specifications The current sensor chips: ACS712ELC-20B
Pin 5V power supply, on-board power indicator
SPECIFICATION:Meter: 5 x 8 x 3.5cm [2 x 3.2 x 1.5\"]
Probe length: 21cm [8\"]
Bronze probe diameter: 4.8mm
silver probe diameter: 5.1mm
Distance between probes: 1.2cm
Original box: NO
Item size: 330*100*30mmFEATURES:
Are you sick of your plants dying? Fed up ..
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
The current sensor chips: ACS712ELC-30B
Pin 5V power supply, on-board power indica..
DESCRIPTION:BFD-1000 specifically designed for use as a black (white) line finding, especially for complex black and white line, cross black and white line detection, it has 6 high sensitivity infrared sensor (5 road patrol line, a road barrier shield), black and white line to the accurate recog..
DESCRIPTION: Five channel flame sensor design, wide range of detection (the detection range of the ordinary single flame sensor is probably about 30°, as the distance increases, the range is gradually reduced, the detection range of the product is greater than 120°)
Able to outpu..
fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications The current sensor chips: ACS712ELC-05B
Pin 5V power supply, on-board power in..
The A3144E(US1881) is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A h..
DESCRIPTION:On-board ADXL345 digital output (supports I2C/SPI), low power, compact acceleration sensor;
Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop than the 1117, faster load the appropriate speed, ideal for high noise power environment;
The pin has been ..