Product description: Main changes from the older version: Add two rows of the holes for the pins. So it can be connected with normal Dupont line.
Add 3 rows of the holes for wiring.
Change the in-line package of ATMEGA32..
Package Include: 1X ATMEL ATmega328 CH340G BOARD with USB CABLE Free Product description: Main changes from the older version: Add two rows of the holes for the pins. So it can be connected with normal Dupont..
Package Include: 1X ATMEGA328P 5V/16M + 3 x sets of header pins
Product description: Mini Pro is a micro-controller board. It has 14 digital input / output pins (of which 6 can be used as PWM outputs),&nb..
Clock Speed 16 MHz
Operating Voltage 5V DC
Digital I/O Pins 10
PWM Channels 4
Analog Input Channels 5
Micro USB 1
Flash Memory 32 KB of which 4KB used by bootloader
SRAM 2.5 KB
EEPROM 1 KB
DESCRIPTION:Crystal X1 is a standard 12MHz, USB host USB device is higher than the required frequency accuracy, X1 error requirement is less than 0.4 ‰, ordinary 12MHz crystal basically meet the requirements. It is strongly recommended to shorten the length of the relevant lead to reduce interfe..
DESCRIPTION:Compared to other versions of the Arduino using a separate USB-Serial converter chip, the Leonardo innovatively uses a single-chip solution. Only with a Atmega32u4 USB communication and control. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB co..
DESCRIPTION:The LilyPad For Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The LilyPad Iduino can be programmed with the software of Arduino. *Note*, the LilyP..
Product description: Cable Not included, Need cable, Buy Here The Nano is an ultra-small simple I/O platform based on open source code.
It has a big advantage in size compared to the old USB version.
Micro-controller : Atmel ATmega328