AHT10 Temperature and Humidity Sensor Module Replace SHT20ht10 Temperature and Humidity Sensor Module Can Replace Sht20 High-Precision Humidity Sensor ProbeAHT10, a new generation of temperature and humidity sensor, has established a new standard in terms of size and intelligenc..
Relative humidity and temperature measurement **All calibration, digital output **Excellent long term stability **No additional member **Long distance signal transmission **Ultra-low power **3-Wired **Fully interchangeableAM2301 digital temperature and humidity capacitance humidity module is a self ..
1. Size: 28.2 mm (length) * 13.1 mm (width) * 10 mm (high)2. Weight: 6 g3. Working voltage: 3 V - 5.5 V4. The sensor models: the loose AM2302 temperature and humidity sensor5. Signal output form: digital signal6. Temperature measurement range: - 40c to 80c7. Measuring accuracy: 0.5c8. The humidity m..
1. Temperature Measurement Range: -55 celsius ~ + 125 celsius . 2. Range Accuracy: ±0.5 celsius . 3. Working Power Supply: DC 3 ~ 5V. 4. Measurement results in 9 ~ 12 digital quantity way serial transmission...
HDC1080 High Precision Temperature Humidity Sensor Module GY-213V-HDC1080 Module for Smart Home IOTSpecifications:The HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power.The HDC1080 operates over a wide supply range, ..
The digital cooking thermometer has the advantages of low power, high stability, and high accuracy. Easy to use just by probing the meat and push a button to get an accurate temp reading. With this thermometer you can always make sure the food you and your family are eating are safe. Everyone should..
MAX31865 Platinum Resistance Temperature Detector Module RTD SensorFeatures:1. The product is a temperature sensor whose resistance changes with temperature, and is a thermistor.2. Compared with most PTC/PTC thermistors, the PT type RTD is very stable. pt100 has been used to measure the temperature ..
Stainless steel sheath and waterproof
Measurement range: -20 to 105 C
Length of wire:1 meter
Size of probe: 5 x 25 mm
Output 2 wires
Type: NTC 10k 1% 3950
measure environmental temperatures using arduino ADC and this 10k NTC LINK
Resistance to temperature conversio..
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2..
This is a low cost humidity and temperature sensor with a single wire digital interface.
The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
DHT11 output calibrated digital signal. It utilizes ..
Digital signal output
18B20 Temperature Sensor Chip
Resolution adjustment ranges from 9-12 bytes.
Operating current: DC5V.
Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
Size: 28 x 12..
Flare the flame sensor infrared receiver module ignition source detection module
indicator light: green one for switch, red one for power.
Built in a potentiometer for sensitivity control.
On-board signal output indication, output effective signal is high, at the same time th..
Immersion Gold Process gilded Pin interference
HMC5983 high-precision triaxial compass magnetic field sensor with temperature compensation
Means of communication: IIC / SPI optional
Power supply: DC3-5V
With temperature compensation data output;
Automatic offset compensa..
The LM35 is a high precision temperature sensor. It has a analog output, which is linearly proportional to the surrounding temperature. Just hook it up to a ADC pin on your microcontroller to get temperature readings.
Output calibrated in ° Celsius
0.5° C accuracy at 25° C.
The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple.
Operating voltage: 3. 0~5. 5V.
Internal integrated cold junction compensation circuit.
With a simple three serial SPI interface.
Temperature signal can ..
4.5V~5V power supply
Small size, low cost
Mounted on a breakout board with two types of pins
10k Pull up resistors for the I2C interface with optional solder jumpers
Easy to integrate
Factory calibrated in wide temperature range:
1, the voltage comparator LM393 chip on board and the detection temperature probes
2 support 5 V / 3.3 V Input Voltage
3 board signal output instructions, output valid signal is high, while LED lights, the output signal can be directly connected to the microcontroller IO