The 34063 is a monolithic control circuit containing the primary functions required for DC–to–DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switc..
7809 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible.
If adequate heat sinking is provided, they can deliver over 1.0A output current.
They are intended as fixed voltage r..
Specifications:Input Voltage Min: 14.6V DC
Input Voltage Max: 35V DC
Output Voltage: 12V DC
Output Current: 1.0A
Voltage Regulator Case Style: TO-220
Operating Temperature Range: 0°C to - 100°C
Operating Voltage Tolerance: 4%..
This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output voltage tolerance within ±1..
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
The LM317 is a linear voltage regulator with an adjustable output. The output voltage is controlled with a voltage divider on the ground pin and can be anything from 1.2 to 37V. The nominal output voltage is selected by means of only a resistive divider, making the device exceptionally easy to use a..
MC34063 is a 1.5 A, Step-Up/Down/ Inverting Switching Regulators The MC34063 is a monolithic control circuit containing the primary functions required for DC−to−DC converters.These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator wit..
The TL431/TL431A are three-terminal adjustable regulator series with a guaranteed thermal stability over applicable temperature ranges. The output voltage may be set to any value between VREF (approximately 2.5 volts) and 36 volts with two external resistors These devices have a typical dynamic outp..
FEATURES:IC, POS VOLT REG, 0.3A, 3.3V, SOT23-3
Input Voltage Min: 1.8V
Input Voltage Max: 6V
Output Voltage Nom.: 3.3V
Output Current: 200mA
Dropout Voltage Vdo: 250mV
LDO Regulator Case Style: SOT-23
No. of Pins: 3..