Model: BE-001933
Features: 5A Over-current protection Sensor module uses current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM, NC, NO three ports to control the exter..
Rs340.00
Model: BE-001794
The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA Rated Input Current: 5A Rated output current: 5mA On-board micro precision current transformer Onboard sampling strengthPCB size: 18.3 x17 (mm) Change: 1000: 1 Linear range: 0 ~ 10A (100 ohms) Linearity: 0.2% Pre..
Rs56.00
Model: BE-001795
The module can measure less than 5A AC current, the corresponding analog output can be adjustedPCB board size: 38 (mm) x18.5 (mm)High-precision op amp circuit board, the signal for precise sampling and appropriate compensation functionAn onboard precision miniature current transformer..
Rs166.00
Model: BE-001748
Size: 19.5 * 20.3mm This module can be used to test the current and voltage.The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector inp voltage to 5 times smaller. Analog inp voltages up to 5 v, the voltage detection module input volt..
Rs126.00
Model: BE-001430
DESCRIPTION:
Model: SCT-013-000
Core Material: Ferrit
External Material: Plastic
Input Current:0A-100A
Output Current:0-50mA
Opening Size:13 x 13mm
Output Plug:3.5mm
Dielectric Strength:6000V AC/1min
Working Temperature:-25-70°C
Cable Length:1.5m
Anti-flaming rate:UL94-V0
..
Rs349.00
Model: BE-000012
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-20B
Pin 5V power supply, on-board power indicator
..
Rs93.00
Model: BE-000022
Fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-30B
Pin 5V power supply, on-board power indica..
Rs98.00
Model: BE-000003
fully Integrated, Hall Effect-Based Linear Current Sensor Module with 2.1 kVRMS Isolation and a Low-Resistance Current Conductor.
Technical Specifications
The current sensor chips: ACS712ELC-05B
Pin 5V power supply, on-board power in..
Rs88.00
Out Of Stock
Model: BE-000450
The A3144E(US1881) is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A h..
Rs9.00
Model: BE-001420
DESCRIPTION:
This non-invasive current sensor clamped around the supply line can measure up to 30 Amps, and allow you to calculate how much current pass through it. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
..
Rs375.00
Model: BE-000932
DESCRIPTION:
Sensitivity and mV/A built-in 9.0 mm current channel
Working temperature:-20~125°C
Working voltage:3.0~12V
output current:3.5mA
..
Rs325.00
Model: BE-000657
Features:
Diameter 9.0mm conductor through hole
Output voltage proportional to AC and DC current
Wide sensing current range 0~100A at 5V volt
High sensitivity 22mV/A
Wide operating voltage range 3.0~12 V.
Low operating current 3mA
Isolation voltage 4000V
Ratiometric output from supply voltag..
Rs325.00
Model: BE-000729
DESCRIPTION:
The Winson WCS1702 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and Communications systems. The unique package allows for easy implementation by the customer. Typical applications include Motor Control load detection and m..
Rs294.00
Out Of Stock
Model: BE-000645
DESCRIPTION:
The Winson WCS1702 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and Communications systems. The unique package allows for easy implementation by the customer. Typical applications include Motor Control load detection and m..
Rs294.00
Model: BE-000727
DESCRIPTION:
The Winson WCS1702 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and Communications systems. The unique package allows for easy implementation by the customer. Typical applications include Motor Control load detection..
Rs294.00
Model: BE-000728
WCS2705 Current Sensor
The Winson WCS2705 provides economical and precise solution for both DC and AC current sensing in industrial, commercial and communications systems. The unique package allows for easy implementation by the customer.Typical applications include motor control, load detection an..
Rs294.00
Model: BE-000726
Features:
Low noise analog signal path
0.4 mΩ internal conductor resistance
Output voltage proportional to AC and DC current
Min. sensing current 0~20A at 5V voltage supply
High Sensitivity 65 mV/A
Wide operating voltage range 3.0~12 V.
Low operating current 3mA
..
Rs294.00
Model: BE-000161
DESCRIPTION:
LED Light AC Electric volt Voltage Tester Volt Alert Pen Detector digital novedades 2015 electricas ac voltage detector
Features:
Electric Socket Wall AC Power Outlet Voltage Detector Sensor Tester Pen 90-1000V
The next generation VoltAlert AC non-contact voltage..
Rs154.00
Showing 1 to 18 of 18 (1 Pages)