Serial Communication

DESCRIPTION: This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.   This chip is like a rotary switch - it internally routes the common pin   (COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx). ..

DESCRIPTION:1.This is a USB 2.0 to TTL UART 6PIN CP2102 Module Serial Converter. Connect MCU easily to your computer!  2.Stable and reliable chipset CP2102  3.USB specification 2.0 compliant with full-speed 12Mbps.  4.All handshaking and modem interface signals.  5.Baud r..

Single-Chip USB to UART Data Transfer:Integrated USB transceiver; no external resistors required Integrated clock; no external crystal required Integrated 1024-Byte EEPROM for vendor ID, product ID, serial number, power descriptor, release number, and product description strings On-chip..

Package Include: 1X FT232RL FT232 USB TO TTL , Not Cable ​Need cable, Buy Here Product description: 100% brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD tr..

DESCRIPTION:The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off. Low-cost, extremely accurate I2C real-time clock (RTC) More steady and precise than DS1302 or DS1307 Suppo..

Description1. FeaturesConvert the PS2 protocol to TWI/IIC,UART, parallel interface Add the key state detection function Wide range of applications2.ApplicationRobot, Electronic products & projects and so on3. Brief introductionPS2 keyboard driver module use a small micr..

DESCRIPTION:100% Brand New and High Build Quality A converter board for electrical levels Max. Baud Rate: No more than 120kbps SPECIFICATION:Dimension: 15.875mm x 9.398mm x 2.54mm Net weight: - 5g Chip Model: MAX3232CSE..

DESCRIPTION:Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output. easy to connect to your MCU. Dual 3.3V and 5V Power output. work with 3.3v and 5v target device. The mini module is designed specifically for STC download and for ARDU..