Search Criteria
Products meeting the search criteria
Model: BE-000106
Performance description:
Digital I/O Digital input/output terminal, a total of 0 ~ 13.
Analog I/O Analog input/output terminal, a total of 0 ~ 5.
Support the ISP download function.
The input voltage: when connected to the computer USB without external power supply, external power supply 5 v ~ ..
Rs399.00
Model: BE-000165
DESCRIPTION:
12V relay contact capacity 10A 250V, with optocoupler protection.
I / O port driver is active low. Active Low means when Input is low, Relay Will Trigger
Used as a microcontroller development board module can be used as appliance control, can be u..
Rs499.00
Model: BE-000189
DESCRIPTION:
Excellent noise suppression,you will hear any noise without connecting input audio.
Dual-channel stereo,only needed 5V power supply can input 5W+5W power,it can drive 4Ω,8Ω little speaker directly,with large output power,enough energy,superior quality,and left right channel..
Rs65.00
Model: BE-000023
Package Include:
1X ATmega32U4 5V/16M + 2 x sets of header pins
Product description:
1). ATMega 32U4 running at 5V/16MHz
2). Supported under IDE v1.0.1
3). On-Board micro-USB connector for programm..
Rs622.00
Model: BE-000312
Technical parameters:
1. Supply voltage: DC 7V-15V
2. Output power: 10w + 10w (8 load)
3. Efficiency: 90%
4. Shutdown Current: 4uA
5. Quiescent current; 20mA
6. SNR: 86%
7. Total harmonic distortion: 5W / 1KHz / 8 ---- 0.1%
8. Frequency range: 20Hz-20KHz
9. Input impedance..
Rs169.00
%20R3%20BOARD+USB%20CABLE%20For%20ARDUINO-243x243w.JPG "ATMEL ATMEGA 2560 MEGA2560-16AU (16 Mhz) R3 BOARD")
Model: BE-000104
Technical Specification
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage 7-12V (recommended power 7.5 V or 9 V.)
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
F..
Rs1,189.00
Model: BE-000313
DESCRIPTION:
The power amplifier circuit board designed using the official standard. the chip uses a selection of US imports original Longding micro Class D amplifier chip. Good product chip is necessary and the majority of music lovers to share. this is our consistent philosophy! The amplifier w..
Rs195.00
Model: BE-001459
FEATURES:
Short circuit protection
Overcharge protection
Over-discharge protection
Overcurrent protection
Can be applied to various 3.7V lithium core
Compact size and lightweight
Ensure the security of battery pack
Rs78.00
Model: BE-001361
Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB BoardSuitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)Product Size: 64mmx20mmx3.4mmMaterial:MetalCharging voltage: 12.6VMaximum output current: 20AMaximum output po..
Rs69.00
Model: BE-000222
DESCRIPTION:
Built-in high precision voltage detection circuit.
Connect to the charger terminals which using high pressure device.
Built-in three over current detection circuit (1 over current, 2 over current ,load short circuit)
Through the MOS tube ,it can control the battery charging ..
Rs132.00
Model: BE-001364
DESCRIPTION:
Low power inverter, massager battery pack, LED light standby power supply, electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Magnification c..
Rs122.00
Out Of Stock
Model: BE-001373
DESCRIPTION:
Sound quality is very good and it can drive 4/6/8 ohm speakers. It has sufficient and high power output 2*160W.
FEATURES:
High output power digital amplifier.
Sound quality is very good by using this module.
Two-channel stereo, 2*160W.
DC 15-36V..
Rs1,169.00
Out Of Stock
Model: BE-000960
Please Note Board has 28 PIN TPA3118 IC and not 32 PIN. DESCRIPTION:
BTL mono 60W digital amplifier board
Amplifier chip: TPA3118
Amplifier Power: 1 * 60W (one channel, stereo requirement to two)
Supply voltage: 8 ~ 24VDC
Rs199.00
Out Of Stock
Model: BE-000962
DESCRIPTION:
The product has been upgraded, with power input reverse polarity protection
It automatically enters pairing mode after boot, the search display device name: Xpecial Audio
Power supply: 9 ~ 14V DC power supply (12V is recommended to use)
Audio input: Bluetooth stereo inp..
Rs1,386.00
Model: BE-001762
Model: PZEM-004TA. Function 1. electrical parameter measurement function (voltage, current, active power). 2. The power button clear function. 3. Power-down data storage function (cumulative power down before saving). 4. PC PC display function (display voltage, current, active po..
Rs760.00
Out Of Stock
Model: BE-000958
DESCRIPTION:
This amplifier board have two power input End and Two audio input End,you can choose each one!
The amplifier board adopts two imported TPA3116D2 digital amplifier chip as the core,one piece as left and right channel power amplifier,other piece as pre-bridge brive..
Rs348.00
Out Of Stock
Model: BE-000959
DESCRIPTION:
Audio type: TPA3116D2
Input voltage: DC 5-24V
Operating frequency: 20Hz-20Hz
Output type: double track; stereo
Machine size: 84*51*29mm (excluding potentiometer)
FEATURES:
A full range of protection system, with reverse connection of power supply prote..
Rs711.00
![iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER [COPY]](https://www.xcluma.com/image/cache/catalog/products/BE-01-0136-250x250.JPG "iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER [COPY]")
Model: BE-000136
iMAX B6 DIGITAL RC Lipo NiMH BATTERY BALANCE CHARGER [COPY]
Note: This is a clone of IMAX B6 But With High quality and same Functionality Power supply not included.
IMAX B6 is the new intelligent multifunction charger which can charge and discharge for Lion, LiPo, LiFe (A12..
Rs1,708.00
Model: BE-001517
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..
Rs250.00