Search Criteria
Products meeting the search criteria
Model: BE-001459
FEATURES:
Short circuit protection
Overcharge protection
Over-discharge protection
Overcurrent protection
Can be applied to various 3.7V lithium core
Compact size and lightweight
Ensure the security of battery pack
Rs78.00
Model: BE-001361
Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB BoardSuitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)Product Size: 64mmx20mmx3.4mmMaterial:MetalCharging voltage: 12.6VMaximum output current: 20AMaximum output po..
Rs69.00
Out Of Stock
Model: BE-000132
Technical Specification
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
512KBytes of flash memory for code
A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Specificati..
Rs3,699.00
Out Of Stock
Model: BE-000224
DESCRIPTION:
Ultra volume:23*24MM Weight 0.45 grams
Excellent noise suppression,you will hear any noise without connecting input audio.
Dual-channel stereo,only needed 5V power supply can input 5W+5W power,it can drive 4 ,8 little speaker directly,with large output power,..
Rs129.00
Model: BE-000357
DESCRIPTION:
The LilyPad For Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The LilyPad Iduino can be programmed with the software of Arduino. *Note*, the LilyP..
Rs345.00
Model: BE-000358
DESCRIPTION:
8K Byte of In-System Programmable Program Memory Flash
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAMDiameter:25mm
Rs410.00
Model: BE-000222
DESCRIPTION:
Built-in high precision voltage detection circuit.
Connect to the charger terminals which using high pressure device.
Built-in three over current detection circuit (1 over current, 2 over current ,load short circuit)
Through the MOS tube ,it can control the battery charging ..
Rs132.00
Model: BE-000902
DESCRIPTION:
TDA8932 35W mono digital amplifier module
The board uses a high-performance digital amplifier TDA8932 chip, a small size, high efficiency, high power, good sound quality, without additional installation of radiator, very suitable for the transformation of active speakers, electro-..
Rs289.00
Model: BE-001364
DESCRIPTION:
Low power inverter, massager battery pack, LED light standby power supply, electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Magnification c..
Rs122.00
Model: BE-001485
DESCRIPTION:
100% Brand New and High Build Quality
Long service life and high reliability
Highly reliable, compact size designed to offer users maximum simplicity
Fast switching
Reduced electromagnetic interference
TECHNICAL PARAMETERS:
Output voltage: AC 24-380V
Outpu..
Rs245.00
Out Of Stock
Model: BE-001373
DESCRIPTION:
Sound quality is very good and it can drive 4/6/8 ohm speakers. It has sufficient and high power output 2*160W.
FEATURES:
High output power digital amplifier.
Sound quality is very good by using this module.
Two-channel stereo, 2*160W.
DC 15-36V..
Rs1,169.00
Model: BE-001506
DESCRIPTION:
100% Brand New and High Build Quality
Long service life and high reliability
Highly reliable, compact size designed to offer users maximum simplicity
Fast switching
Reduced electromagnetic interference
TECHNICAL PARAMETERS:
Output voltage: AC 24-380V
Output cu..
Rs364.00
Model: BE-001374
DESCRIPTION:
TDA7498 is a 100 w + 100 w class D audio amplifier. The IC chip adopts the single power supply, mainly used in home theater and active speakers. And naked cooling pad up TDA7498 adopted EPU hyper-threading encapsulation.
FEATURES:
Output power:100w+100w (VCC+32V,RL=4ohm,THD=..
Rs1,110.00
Out Of Stock
Model: BE-000960
Please Note Board has 28 PIN TPA3118 IC and not 32 PIN. DESCRIPTION:
BTL mono 60W digital amplifier board
Amplifier chip: TPA3118
Amplifier Power: 1 * 60W (one channel, stereo requirement to two)
Supply voltage: 8 ~ 24VDC
Rs199.00
Model: BE-001762
Model: PZEM-004TA. Function 1. electrical parameter measurement function (voltage, current, active power). 2. The power button clear function. 3. Power-down data storage function (cumulative power down before saving). 4. PC PC display function (display voltage, current, active po..
Rs760.00
Out Of Stock
Model: BE-000959
DESCRIPTION:
Audio type: TPA3116D2
Input voltage: DC 5-24V
Operating frequency: 20Hz-20Hz
Output type: double track; stereo
Machine size: 84*51*29mm (excluding potentiometer)
FEATURES:
A full range of protection system, with reverse connection of power supply prote..
Rs711.00
Model: BE-000083
DESCRIPTION:
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to A4988 stepper motor drive carriers, so it can be used as a high..
Rs110.00
Model: BE-000256
FEATURES:
Chipset: MT7601
for Peak throughtput: 150Mbps
Built-in smart antenna
Antenna: 2dBi antenna
en/UploadFiles/SL-1501N.jpg wireless transmission speeds up to 150Mbps
In line with IEEE802.11b, IEEE802.11g, IEEE802.11n standard
WPS security settings with one-click button,
..
Rs269.00
Model: BE-000085
Product description:
1.If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor
2. connect 5v and 9v power supply
3.E, S, D, G, respectively corresponding to the connection of the Enable/..
Rs78.00
Hot
Model: BE-000980
DESCRIPTION:
1.Type: wifi built-in antenna
2.Work for-IEEE 802.11 b/g/n WLAN System,Wireless Communication System,Wi-Fi / WiMAX / MIMO System
SPECIFICATION:
Frequency: 2400 MHz ~ 2500 MHz
S.W.R <= 2.0
Gain: 4.5 dBi
Impedance: 50 ohm
Size: 42*12mm
Tot..
Rs29.00