Search Criteria
Products meeting the search criteria
Out Of Stock
Model: BE-001426
DESCRIPTION:
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control integrated circuit (IC), further expand the TI energy-saving electronic products.INA219 has the industry's highest precision and the small size, not only can monitor the..
Rs179.00
Model: BE-000787
DESCRIPTION:IRF3205 is Advanced HEXFET® Power MOSFETs utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer ..
Rs30.00
Model: BE-000788
DESCRIPTION:
The HEXFET technology is the key to international Rectifier's advanced line of power MOSFET transistors. The efficient geometry and unique processing of this latest "state of the art" design achieves: very low on-state resistance combined with high transconductances; superior reverse..
Rs49.00
Model: BE-000191
DESCRIPTION:
Chip: KA2284
Supply voltage: 3.5V-12V
The magnitude of the level can be adjusted
AC and DC signals can be controlled by jumper
PCB board size: 29 (mm) x21 (mm)
Adjustable span of power level
AC and DC signals can be controlled by jumper
PCB board size: 29mm x 21mm
..
Rs121.00
Model: BE-000210
DESCRIPTION:
Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity Widely used in: stereo, TV, video machine, disc machine, set-top boxes, digital photo fram..
Rs30.00
Out Of Stock
Model: BE-000356
DESCRIPTION:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro/Acc: InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6++
Built-in airplane mode:
Dualcop..
Rs3,121.00
Model: BE-000112
Product description:
The shield contains two L293D motor drivers and one 74HC595 shift register.
The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
The output enable of the L293D is directly connected to PWM outputs of ..
Rs115.00
Out Of Stock
Model: BE-000072
Rs65.00
Model: BE-000522
L293D is a typical Motor driver or Motor Driver IC which allows DC motor to drive on either direction.
L293D is a 16-pin IC which can control a set of two DC motors simultaneously with individual directional and speed control or just switch on and off 4 DC motors.
The L293D has quadruple high cu..
Rs32.00
Model: BE-000668
General Description:
The L298 is an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels anddrive inductive loads such as relays, solenoids, DC and stepping motors. Two ..
Rs97.00
Model: BE-001300
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
Rs598.00
Out Of Stock
Model: BE-000400
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs100.00
Out Of Stock
Model: BE-000453
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs189.00
Out Of Stock
Model: BE-000857
DESCRIPTION:
A photoresistor or light dependent resistor (LDR) is a resistor whose resistance decreases with increasing incident light intensity; in other words, it exhibits photo conductivity.
A photo-resistor is made of a high resistance semiconductor. If light falling on the devic..
Rs22.00
Model: BE-000537
These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low i..
Rs20.00
Out Of Stock
Model: BE-000274
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
Rs114.00
Model: BE-000670
General Description:
The LM2575 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. This devices gives fixed output voltage of 5V.
..
Rs34.00
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Out Of Stock
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Hot
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Model: BE-000523
LM2596S 5.0 LM2596 NSC TO-263 3A Step-Down 5V Regulator
Rs60.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000268
DESCRIPTION:
Output current: 1.5A (minimum), 2.2A (typical)
The input and output voltage difference (VIVO): 40Vdc (max)
Output adjustable voltage range: 1.2 ~ 37V
Working temperature: 55 ~ C to +150 ~ C
Current output: 1.5A
Voltage input: 4.2 ~ 40 V
Working temperature: 0 ~ 125 C ~..
Rs67.00