Search Criteria
Products meeting the search criteria
Model: BE-001300
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
Rs598.00
Model: BE-000028
DESCRIPTION:
The board has 6 male pins and 2 double terminals.
The motors connect to the 2 terminals. In the middle of the male pins are the VCC and GND pins. This is the input voltage for the L9110 chips. Some H-bridges like the L293 and L298 require a logic voltage and a separate voltage ..
Rs53.00
Out Of Stock
Model: BE-000400
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs100.00
Out Of Stock
Model: BE-000453
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs189.00
Model: BE-000283
DESCRIPTION:
PCB size:1.52cm x 2.22cm
Working Voltage: 5 Volt DC
Output: 4-5 Volt DC
On detecting a laser signal, output goes at high level (5V) until laser signal is there.
NOTE: This sensor is non-modulator, to be used indoors away from any bright light or direct s..
Rs68.00
Out Of Stock
Model: BE-000945
DESCRIPTION:
Features boost circuit
Signal output indicator
SPECIFICATION:
Effective distance: 0.8m(typ), 1.5m(max)
Power: 2.5V ~ 5.0V
Dimension: 47.7mm * 17.9mm
Mounting holes size: 2.0mm
APPLICATION:
Obstacle detection
Pipeline counter
Smart robot
Obstacle..
Rs1,467.00
Hot
Model: BE-000519
Please note it is SMD ICThis is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output vol..
Rs11.00
Out Of Stock
Model: BE-000857
DESCRIPTION:
A photoresistor or light dependent resistor (LDR) is a resistor whose resistance decreases with increasing incident light intensity; in other words, it exhibits photo conductivity.
A photo-resistor is made of a high resistance semiconductor. If light falling on the devic..
Rs22.00
Out Of Stock
Model: BE-000878
LDR 8MM LIGHT DEPENDENT RESISTOR
Rs12.00
Out Of Stock
Model: BE-000274
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
Rs114.00
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Out Of Stock
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Hot
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Model: BE-000523
LM2596S 5.0 LM2596 NSC TO-263 3A Step-Down 5V Regulator
Rs60.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000661
DESCRIPTION:LM35 is an integrated analog temperature sensor whose electrical output is proportional to Degree Centigrade. LM35 Sensor does not require any external calibration or trimming to provide typic accuracies. The LM35's low output impedance, a linear output, and precise inherent calibration ..
Rs102.00
Model: BE-000674
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Rs6.00
Out Of Stock
Model: BE-000208
DESCRIPTION:
A dedicated and well-designed data logging shield for Arduino.
It is easy to assemble and customize, also equipped with extensive documentation and libraries.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD c..
Rs145.00
Out Of Stock
Model: BE-001328
DESCRIPTION:
Low power small volume fast start and high cost performance!
HLK-M30 is a new low-cost embedded electronic UART-WIFI (serial port - wireless network) modular. This product converts between the user's serial port wireless network (wifi) to achieve the network standard built-i..
Rs1,230.00
Out Of Stock
Model: BE-000169
DESCRIPTION:
Detect all sorts of combustible gases, natural gas (methane), bottled gas (propane), LPG (liquefied petroleum gas), coal gas, including town gas, small and compact, the design and color makes it ideal for use in the home, small commercial properties, and recreational v..
Rs914.00
Model: BE-000183
DESCRIPTION:
Input voltage range: 3.0-30V Note: 30V maximum voltage limit must be aggressive in order to avoid accidental damage.
Output voltage range:3.5-30V &nbs..
Rs396.00
Out Of Stock
Model: BE-001503
DESCRIPTION:
The power supply is a kind of high-efficiency voltage automatically regulator.Whatever is the input voltage value,the output voltage can be maintained constant. Forexample,set the output to 12V, then the variation of the input voltage in the range of 5-32V, the output voltage in the ..
Rs1,421.00
Out Of Stock
Model: BE-000293
DESCRIPTION:
Odometers are extremely useful for cars, they tell you how far you have gone, wouldn't it be nice if you were able to have a device that does the same for electrical current? The LTC4150 Coulomb Counter Breakout is here to be your odometer for current. If you are wondering: a coulomb..
Rs376.00
Model: BE-000301
Description:
Main chip: ISD1820
Size: Approx. 38 x 42.5mm / 1.49 x 1.67 inch
Working voltage: DC 3-5V
Power supply: 3-5V, can be connected to row pin
Recording/playback control mode: Key control or singlechip, IO has drawn the line of control;
Main feature:
Convenient 10s re..
Rs122.00