Search Criteria
Products meeting the search criteria
Model: BE-000193
DESCRIPTION:
The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
Module features are as follows:
Display of male red for the four digital tube
Adjustable di..
Rs47.00
Model: BE-000160
DESCRIPTION:
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V ..
Rs21.00
Model: BE-000052
Product description:
1. Working Voltage: DC12V -/+ 10%
2. Current:Standby≤10mA,Working ≤128mA
3. Working Temperature: -10'C—+60'C
4. Receiver Frequency: 315MHz/433.92MHZ
5. Receiving Sensitivity: -105dB
6. Output State: Swit..
Rs677.00
Out Of Stock
Model: BE-000298
DESCRIPTION:
Size: 38 * 10 * 4mm
Charging voltage: 5V
Charging current : 400-500MA become hot during charging is normal.
Boost Output: 5V
Output current: 300 ~ 400MA; suitable for use in less demanding situations.
PERFORMANCE:
This boar..
Rs138.00
Out Of Stock
Model: BE-000119
Package Include:
1X 4*4 matrix switch
Product description:
4x4 matrix membrane keyboard
8P DuPont, 2.54mm interval.
and can be inserted on the pin connection on the circuit.
white sticker on the back of the keyboard remove the pasted fir..
Rs42.00
Model: BE-000938
DESCRIPTION:
BFD-1000 specifically designed for use as a black (white) line finding, especially for complex black and white line, cross black and white line detection, it has 6 high sensitivity infrared sensor (5 road patrol line, a road barrier shield), black and white line to the accurate recog..
Rs98.00
Out Of Stock
Model: BE-000063
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
..
Rs147.00
Hot
Model: BE-000082
PRODUCT DESCRIPTION:
When you use the product, the module inputs and outputs to be isolated from ground！
Input voltage range:4～38VDC(Note:input voltage not exceeding 38V)
Output voltage range:1.25-36VDC adjustable
Output current: 0-5A
Output power: 75W
High efficiency up to 96..
Rs122.00
Model: BE-000122
Package Include:
5X HC-SR501 Sensor
Product description:
100% New Adjust Infrared IR PIR Motion Sensor Detector Module Security Motion HC-SR501
Color: White + Green
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Infrared sens..
Rs565.00
Model: BE-000199
DESCRIPTION:
DIY Mobile Power Supply, 5V output for charging Phone, MP3, MP4, PSP, etc
Modules nature: non-isolated Buck
With Overcurrent Protection
Rectification: Non-synchronous rectification
(Note: Please connect right as the printed : N-,IN+,OUT-,OUT+ ,or else the Module will be bu..
Rs89.00
Out Of Stock
Model: BE-000304
DESCRIPTION:
100% Brand New
Main chip level using BB company HIFI PCM2704 USB decoding chip
Supply voltage : 5 V (USB )
Distortion : THD + N: 0.006% (RL> 10 k)
Distortion : THD + N: 0.025% (RL = 32 )
SNR : 98 dB
Dynamic range : 98 dB
Earphone output power : 12 mW (RL = 32 )
Supported..
Rs160.00
Out Of Stock
Model: BE-000981
DESCRIPTION:
Bluetooth: 3-20 Meters(According to the distance and barrier and transmitting power)
Application: support HF calls, bluetooth A2DP stereo;
Frequency: 2.4Hz
Media Port: USB port and TF port multimedia play;
Audio Input: 3.5mm/2.0 frequency
Power Supply: 5V
Connecting Po..
Rs193.00
Model: BE-000472
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs20.00
Model: BE-000557
The 74HC245 is identical in pinout to the LS245.
The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs.
The HC245 is a 3-state noninverting transceiver that is used for 2-way asynchronous communication between data buses.
..
Rs18.00
Out Of Stock
Model: BE-000259
DESCRIPTION:
Conversion level range: 1.8V-6V
Module size: 28mm X 27.5mm
Instructions:( for example 3.3V, 5V system conversion)
VCCA connect to 3.3V power supply
VCCB connected to 5V power supply
GND negative one, two power supply common ground
&nb..
Rs160.00
Model: BE-000049
ackage Include:
1x ACTIVE BUZZER DRIVER MODULE
Product description:
Feature:
Module using S8550 transistor drive
Operating Voltage 3.3V-5V
With fixed bolt hole for easy installation ..
Rs24.00
Out Of Stock
Model: BE-000291
DESCRIPTION:
2 sine wave and 2 square wave output
AD9850 Frequency: 0-40MHz
After the 20-30MHz frequency harmonics increases, the waveform will become unclean.
Square Wave: 0-1MHz
Low-pass filter with 70MHz, so the waveform better than SN
Parallel and serial data input can be selecte..
Rs1,024.00
Model: BE-000344
DESCRIPTION:
1. Working voltage: 5 VDC.
2. Working current: 10-15 mA.
3. Drive current: 100 mA.
4. Induction distance: 3-50 cm.
5. Size: 17 x 45 mm.
Connection: red take 5 V. green meet GND. yellow line output.
Through the sensors to adjust the knob on the back. induction ..
Rs137.00
Model: BE-000971
DESCRIPTION:
On-board ADXL345 digital output (supports I2C/SPI), low power, compact acceleration sensor;
Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop than the 1117, faster load the appropriate speed, ideal for high noise power environment;
The pin has been ..
Rs105.00
Out Of Stock
Model: BE-000455
Fits the CPU/RAM, Network and Power chips on the Raspberry Pi
Pre-applied thermally conductive adhesive makes installation simple
Help keep your Pi cool while overclocking
SIZE:
14mm(L) x 14mm(W) x 5mm(H) - 1PC
9mm(L) x 9mm(W) x 4mm(H) - 2PC
Rs379.00
Model: BE-000002
Product description:
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
It has total of four slots, can drive four A4988 stepper motor. Each stepper motor only need two IO ports. In other words, six IO ports can be well managed..
Rs101.00
Out Of Stock
Model: BE-000194
DESCRIPTION:
Use LCD screen as display devices.
SPI interface, maximum limit save the I/O resources.
Specially added five rocker, convenient implementation structures, human-computer interaction interface, all the rest of the analog and digital interface with pin derivatio..
Rs1,149.00
Out Of Stock
Model: BE-000117
DESCRIPTION:
Arduino LCD Keypad Shield
This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards.
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Screen ..
Rs179.00
Out Of Stock
Model: BE-000966
DESCRIPTION:
This is a J-Link JTAG converter, it is a great item for your ARM Emulator . It also supports MINI2440, TQ2440 and other New Version and Popular ARM board It includes SWD 6PIN interface and SWD 4PIN port.
It is also compatible with sockets as follow :
20PIN Pitch = 2.54MM
20P..
Rs105.00
Out Of Stock
Model: BE-000131
Product description:
Detail:
Color: White & Blue
Quantity: 1 pcs
Size(Except bracket): approx. 5 x 4.2 x 3.3 cm (H x L x W)
Input Voltage: AC / DC 12V
Max Load Current: 10A
Frequency..
Rs210.00