Search Criteria
Products meeting the search criteria
Model: BE-000375
DESCRIPTION:
4pcs universal Tall Landing gear skids for DJI F450 F550 SK480 FPV aerial photo
Height:150mm
weight:90 grams
easy for install on the DJI F450 F550 or similar frame
come with 4pcs for one full set.
come with M2.5*8 Screws for assembling
Packages Including:
High La..
Rs164.00
Out Of Stock
Model: BE-000273
DESCRIPTION:
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication with for example an Arduino.
Both motors can be driven simultaneously while set to a different speed and direction.
..
Rs766.00
Out Of Stock
Model: BE-000203
DESCRIPTION:
KKMulticopter controller is a flight control board for up to 6 Rotor Aircraft. Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega168PA IC. The Atmega168PA IC u..
Rs1,310.00
Out Of Stock
Model: BE-000356
DESCRIPTION:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro/Acc: InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6++
Built-in airplane mode:
Dualcop..
Rs3,121.00
Model: BE-001300
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
Rs598.00
Model: BE-000028
DESCRIPTION:
The board has 6 male pins and 2 double terminals.
The motors connect to the 2 terminals. In the middle of the male pins are the VCC and GND pins. This is the input voltage for the L9110 chips. Some H-bridges like the L293 and L298 require a logic voltage and a separate voltage ..
Rs53.00
Hot
Model: BE-000038
Product description:
Product Model: MG90S
Working torque: 2KG/cm
Reaction speed: 0.11 seconds / 60 degrees (4.8V)
Operating temperature: 0 -55
The deadband setting: 5 microseconds
Plug Type: JR, FUTABA General
Rotation angle: 36..
Rs117.00
Out Of Stock
Model: BE-000084
Product description:
1. Onboard motor driver chip ULN2003A;
2. The chip frequently-used pin leads out for easy connection;
3. Pin 5~12V power supply;
4. On-board 4-way signal indicator;
4. you can connect directly 28BYJ-48 model of the stepper motor
Packa..
Rs10.00
Out Of Stock
Model: BE-001489
DESCRIPTION:
100% Brand New and High Build Quality
The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.
There are 3 modes to check servos or ESC:
Manua..
Rs127.00
Model: BE-000977
DESCRIPTION:
The Mute Submersible Pump, cooling water circulation can be used to computer or other places water circulation.
Mobile phone charger or USB power supply available
Voltage: DC3-5 v
Current: 100-100 mA
Head: 0.3-0.3 meters
Traffic: 1.2 to 1.6 L/min
Rs36.00
Out Of Stock
Model: BE-001508
DESCRIPTION:
MinimOSDis a super-tiny board designed by 3DRobotics. It's all you need to get OSD telemetry data from ArduPilot Mega. Just connect your FPV camera and a video link and you're ready to fly with instruments on screen.
It's intended to be a dedicated APM telemetry video output. So, ..
Rs979.00
Out Of Stock
Model: BE-000188
DESCRIPTION:
APM has an companion OSD board called MinimOSD. It reads all the MAVLink data in the APM telemetry stream and overlays it on the video stream if you're using an on-board camera and wireless video transmitter. This is useful if you're flying in First Person View (FPV) mode or don't wa..
Rs549.00
Out Of Stock
Model: BE-000101
Product description:
Powder coated Metal chassis for robots. Easy to mount the motors on place by using normal motor mount nut.
It can either be used in skid steel configuration (4 motors) or differential configuration (2 rear wheels + 1 front castor wheel).
The body c..
Rs127.00
Model: BE-000155
DESCRIPTION:
CCPM Servo Consistency Master / Servo tester
The device also can be used as a signal generator for electric speed controller (ESC),
Then you can test your motor system without using a transmitter and receiver.
There are 3 modes to check servos or ESC:
Manual mode: turn the..
Rs86.00
Model: BE-000105
Product description:
Main Features:
Kit is a best Robot learning tutorial
Motor power supply is 3V-6V
All the parameter below is tested without load
Great for DIY project
Voltage
DC 3V
DC 5V
DC 6V
..
Rs77.00
Model: BE-000205
DESCRIPTION:
Gear Type: All Metal Gears
Stall torque: 12kg / cm (6V)
Power Supply: Through External Adapter
Operation Voltage: 4.8 - 7.2 V
Temperature range: 0 to 55
Operating Speed: 0.17sec / 60 degrees (4.8V no load)
Operating Speed: 0.13sec / 60 degrees (6.0V no load)
Complian..
Rs219.00
Out Of Stock
Model: BE-000081
DESCRIPTION:
1. Onboard motor driver chip ULN2003A;
2. The chip frequently-used pin leads out for easy connection;
3. Pin 5~12V power supply;
4. On-board 4-way signal indicator;
4. XH-5P onboard pin socket, you can connect directly 28BYJ-48 model of the stepper motor
&nbs..
Rs93.00
Model: BE-000264
DESCRIPTION:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board. 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board
Motor:
- Di..
Rs120.00
Out Of Stock
Model: BE-000965
SPECIFICATION:
Operating Voltage: 4.8-6.0 V
PWM Input Range: Pulse Cycle 20±2ms, Positive Pulse 1~2ms
STD Direction: Counter Clockwise / Pulse Traveling 1500 to 1900µsec
Stall Torque: 5Kgf.cm (69.5 oz/in) at 4.8V, 6Kgf.cm (83.4 oz/in) at 6V
Operating Speed: 0.33 sec/ 60° at 4.8V, 0.3 s..
Rs337.00
Model: BE-000310
DESCRIPTION:
XT60 plug high-current connector for a weight 6 g
Use super-retardant materials, encountered fire does not burn.
Slip plug design, plug easier.
Anti inserted in the wrong! Welding and easy! Asymmetrical design, beautiful appearance.
Precision machining. Connections are tight with..
Rs29.00
Out Of Stock
Model: BE-001467
FEATURES:
Drive mode: Constant current chopper drive
Excitation mode: 2-phase excitation (2-phase four-run), can forward and reverse rotation
Steering: AB-BC-CD-DA sequentially energized
Rated current (single-phase): 1.5A DC
Power supply voltage: 12-36V
Step Angle: 1.8 °
Insulation..
Rs2,010.00
Model: BE-000083
DESCRIPTION:
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to A4988 stepper motor drive carriers, so it can be used as a high..
Rs110.00
Model: BE-000085
Product description:
1.If jumper is hit the position of ON DP, that means 16 segment (4988) or 32 segment (8825)Jm connected motor
2. connect 5v and 9v power supply
3.E, S, D, G, respectively corresponding to the connection of the Enable/..
Rs78.00
Model: BE-001517
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..
Rs250.00