Search Criteria
Products meeting the search criteria
Out Of Stock
Model: BE-000937
Product Name
Resistance Temperature Sensor
Transfer Type
PT100
Temperature Range
-50- +250°C
External Shielding
Insulated Shield
Probe Diameter
3mm/ 0.12"
Probe Length
43mm/ 1.7"
Cable Length
111cm/43..
Rs122.00
Out Of Stock
Model: BE-000940
DESCRIPTION:
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. ..
Rs109.00
Hot
Model: BE-000929
DESCRIPTION:
The CNY70 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light.
APPLICATION:
Optoelectronic scanning and switching devices i.e., index sensing, coded disk scanning etc. (optoelectronic encoder assemblies). L..
Rs50.00
Out Of Stock
Model: BE-000911
DESCRIPTION:
This is a small micro switch sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and the status indicator LED onboard. That makes it easier for testing.The miniature snap-action micro switch with roller lever ..
Rs35.00
Model: BE-000016
Description:
This is a low cost humidity and temperature sensor with a single wire digital interface.
The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
DHT11 output calibrated digital signal. It utilizes ..
Rs53.00
Model: BE-000013
DESCRIPTION:
Can detect ambient humidity and temperature
sensor DHT11
Humidity measuring range: 20%-95% (range 0-50 degrees) and humidity measurement error: +-5%
Temperature measurement range: 0-50 ..
Rs58.00
Out Of Stock
Model: BE-000223
DESCRIPTION:
Type:AM2302.
Accuracy resolution:0.1.
Humidity range:0-100%RH.
Temperature range:-40~80℃.
Humidity measurement precision:±2-5%RH.
Temperature measurement precision:±0.5℃.
4-pin package.
Ultra-low power.
No ..
Rs59.00
Model: BE-000919
SPECIFICATION:
Voltage: 5V
Output: Standard infrared
Receive frequency: 38kHz Carrier IR code
Transmission distance: 1~8m (Depends on transmit terminal)
Platform: Arduino, MCU
Application: For infrared communication, infrared remote control
Rs44.00
Model: BE-001597
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
Rs1,059.00
Model: BE-000390
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
Rs631.00
Model: BE-000005
Product description:
Digital signal output
18B20 Temperature Sensor Chip
Resolution adjustment ranges from 9-12 bytes.
Operating current: DC5V.
Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
Size: 28 x 12 x 10 mm..
Rs69.00
Hot
Model: BE-000061
Rs57.00
Model: BE-000458
EM4305 125khz PROGRAMMABLE RFID SMART TAGS REWRITABLE KEYFOBS
Rs51.00
Out Of Stock
Model: BE-000278
DESCRIPTION:
This device is one chip module with;
- Finger pint algorithm.
- Optical sensor.
The major function are the following:-
- High accuracy and High speed finger print identification technology.
- Ultra-thin optical sensor.
- 1:1 verification, 1:N identification
- Downloading f..
Rs1,471.00
Out Of Stock
Model: BE-000924
DESCRIPTION:
Fingerprint scanners are awesome. use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you..
Rs1,800.00
Model: BE-000010
Flare the flame sensor infrared receiver module ignition source detection module
Descriptions:
indicator light: green one for switch, red one for power.
Built in a potentiometer for sensitivity control.
On-board signal output indication, output effective signal is high, at the same time th..
Rs33.00
Model: BE-000174
DESCRIPTION:
MQ-6 Sensor:
Sensitive material MQ-6 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When there is the environment in which the combustible gas sensor , conductivity sensor with increasing concentration of combustible gases in air increases . U..
Rs79.00
Out Of Stock
Model: BE-000992
FEATURES:
- Angle Displacement Measurement
- Bends and Flexes physically with motion device
- Possible Uses
- Robotics - Gaming (Virtual Motion)
- Medical Devices
- Computer Peripherals
- Musical Instruments
- Physical Therapy
- Simple Constructio..
Rs379.00
Out Of Stock
Model: BE-000982
DESCRIPTION:
A simple Flex Sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo power glove. I love the Nintendo Power Glove. It's so bad! The resis..
Rs254.00
Model: BE-001731
DESCRIPTION:
This is a Force sensitive resistor with a square, 1.75x1.5", sensing area. This will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR ..
Rs710.00
Out Of Stock
Model: BE-001733
DESCRIPTION:
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resist..
Rs397.00
Model: BE-000184
DESCRIPTION:
Working voltage: DC 3.3V-5V
Working current: try to choose more than 1A power supply
Working temperature: - 10oC - +50oC
Mounting aperture: M3 screws
Detection range: 1mm to 60 CM adjustable, the closer the performance more stable, white reflects the farthest distance.
S..
Rs105.00
Model: BE-000171
DESCRIPTION:
Sensitive material MQ-3 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When present in the environment in which the alcohol vapor sensor , a conductivity sensor with increasing concentration of alcohol gas in air is increased . Using a simple cir..
Rs93.00
Model: BE-000173
DESCRIPTION:
MQ-5 sensor :
Sensitive material MQ-5 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When there is the environment in which the combustible gas sensor , conductivity sensor with increasing concentration of combustible gases in air increases . ..
Rs79.00
Model: BE-000172
DESCRIPTION:
MQ-4 Sensor :
Sensitive material MQ-4 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When there is the environment in which the combustible gas sensor , conductivity sensor with increasing concentration of combustible gases in air increases . ..
Rs78.00