Search Criteria
Products meeting the search criteria
Model: BE-000241
DESCRIPTION:
AC-DC 220V To 3.3
Visolating Switch Power Supply Module/ Step-Down Module
FEATURES:
1. Meet UL, CE requirements,
2. Ultra-thin, ultra-small
3. All voltage input (AC: 90 ~ 264V)
4. Low ripple and low noise
5. Output overload and short circuit protect..
Rs189.00
Model: BE-000242
FEATURES:
1. Meet UL, CE requirements,
2. Ultra-thin, ultra-small
2. All voltage input (AC: 90 ~ 264V)
3. Low ripple and low noise
4. Output overload and short circuit protection
5. High efficiency, high power density
6. The product is designed to meet the requirements of EMC and Safety Tes..
Rs205.00
Model: BE-000028
DESCRIPTION:
The board has 6 male pins and 2 double terminals.
The motors connect to the 2 terminals. In the middle of the male pins are the VCC and GND pins. This is the input voltage for the L9110 chips. Some H-bridges like the L293 and L298 require a logic voltage and a separate voltage ..
Rs53.00
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Out Of Stock
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Hot
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Model: BE-000523
LM2596S 5.0 LM2596 NSC TO-263 3A Step-Down 5V Regulator
Rs60.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Out Of Stock
Model: BE-001503
DESCRIPTION:
The power supply is a kind of high-efficiency voltage automatically regulator.Whatever is the input voltage value,the output voltage can be maintained constant. Forexample,set the output to 12V, then the variation of the input voltage in the range of 5-32V, the output voltage in the ..
Rs1,421.00
Hot
Model: BE-000198
DESCRIPTION:
1.Electrical characteristics
The maximum output current: 2 a
The input voltage: 2 v ~ 24 v
The maximum output voltage: 28 v
Efficiency: ≤93%
2.Mechanical properties
product size: 36 mm * 17 mm * 14 mm
3.Method of use
The module of the IN+ and -..
Rs34.00
Model: BE-000264
DESCRIPTION:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board. 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board
Motor:
- Di..
Rs120.00
Model: BE-000380
DESCRIPTION:
100% Brand New and High Build Quality
This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module,capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation.
Module highlights: 5A high power、high efficiency and low ripp..
Rs76.00
Out Of Stock
Model: BE-001467
FEATURES:
Drive mode: Constant current chopper drive
Excitation mode: 2-phase excitation (2-phase four-run), can forward and reverse rotation
Steering: AB-BC-CD-DA sequentially energized
Rated current (single-phase): 1.5A DC
Power supply voltage: 12-36V
Step Angle: 1.8 °
Insulation..
Rs2,010.00
Model: BE-000083
DESCRIPTION:
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to A4988 stepper motor drive carriers, so it can be used as a high..
Rs110.00
Model: BE-001517
DESCRIPTION:
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). It requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. It pro..
Rs250.00