Search Criteria
Products meeting the search criteria
Model: BE-000283
DESCRIPTION:
PCB size:1.52cm x 2.22cm
Working Voltage: 5 Volt DC
Output: 4-5 Volt DC
On detecting a laser signal, output goes at high level (5V) until laser signal is there.
NOTE: This sensor is non-modulator, to be used indoors away from any bright light or direct s..
Rs68.00
Model: BE-000945
DESCRIPTION:
Features boost circuit
Signal output indicator
SPECIFICATION:
Effective distance: 0.8m(typ), 1.5m(max)
Power: 2.5V ~ 5.0V
Dimension: 47.7mm * 17.9mm
Mounting holes size: 2.0mm
APPLICATION:
Obstacle detection
Pipeline counter
Smart robot
Obstacle..
Rs1,467.00
Model: BE-000519
Please note it is SMD ICThis is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage. This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output vol..
Rs11.00
Model: BE-000857
DESCRIPTION:
A photoresistor or light dependent resistor (LDR) is a resistor whose resistance decreases with increasing incident light intensity; in other words, it exhibits photo conductivity.
A photo-resistor is made of a high resistance semiconductor. If light falling on the devic..
Rs22.00
Model: BE-000878
LDR 8MM LIGHT DEPENDENT RESISTOR
Rs12.00
Model: BE-000863
Rs7.00
Model: BE-000537
These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low i..
Rs20.00
Model: BE-000669
General Description:
These low cost JFET input operational amplifiers combine two state–of–the–art analog technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The JF..
Rs38.00
Model: BE-000274
DESCRIPTION:
LiPo batteries are a great way to power your projects. They're small, lightweight, and pack a pretty good punch for their size. Unfortunately, even the best batteries eventually run low on power and when they do it's often unexpected (and at the worst time). Don't be caught by surpri..
Rs114.00
Model: BE-000670
General Description:
The LM2575 series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load with excellent line and load regulation. This devices gives fixed output voltage of 5V.
 ..
Rs34.00
Model: BE-000527
Rs65.00
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Model: BE-000523
LM2596S 5.0 LM2596 NSC TO-263 3A Step-Down 5V Regulator
Rs60.00
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000578
The LM317 is a linear voltage regulator with an adjustable output. The output voltage is controlled with a voltage divider on the ground pin and can be anything from 1.2 to 37V. The nominal output voltage is selected by means of only a resistive divider, making the device exceptionally easy to use a..
Rs27.00
Model: BE-000268
DESCRIPTION:
Output current: 1.5A (minimum), 2.2A (typical)
The input and output voltage difference (VIVO): 40Vdc (max)
Output adjustable voltage range: 1.2 ~ 37V
Working temperature: 55 ~ C to +150 ~ C
Current output: 1.5A
Voltage input: 4.2 ~ 40 V
Working temperature: 0 ~ 125 C ~..
Rs67.00
Model: BE-000592
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Applications include transducer amplifiers, dc amplification blocks, and all the conventional opera..
Rs15.00
Model: BE-000673
Advantages:
High precisiocomparators
Reduced VOS drift over temperature
Eliminates need for dual supplies
Allows sensing near GND
Compatible with all forms of logic
Power draisuitable for battery operation
Features:
Four Independent Comparators with Low Offset Voltage
Si..
Rs11.00
Model: BE-000586
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Rs6.00
Model: BE-000674
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Rs6.00
Model: BE-000307
DESCRIPTION:
On-board LM386 Chip
20 multiplier benefits circuit design
on-board speaker wiring Block
on-board 10K variable resistor. you can adjust the volume of the enlarged
On-board power indicator
the chip pin leads. can be directly input audio signal
Operating voltage: 5 ~ 12V
Rs40.00
Model: BE-000590
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200.
The inputs are gr..
Rs8.00
Model: BE-000676
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This ..
Rs98.00