Search Criteria
Products meeting the search criteria
Model: BE-000557
The 74HC245 is identical in pinout to the LS245.
The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs.
The HC245 is a 3-state noninverting transceiver that is used for 2-way asynchronous communication between data buses.
..
Rs18.00
Model: BE-000607
Features:
Identical to 74HC241 with Different Pinouts
Hysteresis at Inputs to Improve Noise Margin
PNP Inputs Reduce Loading
3-State Outputs Drive Bus Lines
Input Clamp Diodes
74HC541 3-STATE buffers utilize advanced silicon-gate CMOS technology. They possess high dr..
Rs137.00
Model: BE-000535
The 74HC573; 74HCT573 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A.
The 74HC573; 74HCT573 has octal D-type transparent latches featuring separate D-type inputs for each latch and 3-state true..
Rs20.00
Model: BE-000575
The 74HC595 is a very handy IC used in many microcontroller projects. You clock in 8 bits of data (like, on/off settings for 8 LEDs) via two lines, and when you toggle a third line, it pops these settings out on 8 outputs on the IC. So you trade 3 valuable lines on your microcontroller for..
Rs8.00
Model: BE-000608
Features:
Performs Comparison of Binary or BCD Codes
Can Compare Greater Than, Less Than and Equal
Words of Greater Length Can be Compared by Cascading
Operating Temperature up to 70oC
High-Speed CMOS Type
The 74HC/HCT85 are high-speed Si-gate CMOS devices and are pin compatible w..
Rs27.00
Model: BE-000609
Features:
Four Independent EXCLUSIVE-OR Gates
Standard Pin Arrangement
Fast Switching Times
Operating Temperature up to 70oC
High-Speed CMOS Type
The 74HC86 exclusive OR gate utilizes advanced silicon-gate CMOS technology to achieve operating speeds similar to equivalent LS-TTL ga..
Rs11.00
Model: BE-000611
This device contains six independent gates each of which performs the logic INVERT function.
Rs10.00
Model: BE-000612
Features:
Convert TTL Voltage Levels to MOS Levels.
High Sink-Current Capability.
Input Clamping Diodes Simplify System Design.
Open-Collector Driver for Indicator Lamps and Relays.
Inputs Fully Compatible With Most TTL Circuits.
These hex inverter buffers/drivers featur..
Rs23.00
Model: BE-000613
This device contains two independent positive-edge-triggered J-K flip-flops with complementary outputs.
The J and K data is accepted by the flip-flop on the rising edge of the clock pulse.
The triggering occurs at a voltage level and is not directly related to the transition time of the rising ..
Rs16.00
Model: BE-000614
Features:
Designed specifically for high speed:
Memory decoders
Data transmission systems
DM74LS138 3-to-8-line decoders incorporates 3 enable inputs to simplify cascading and/or data reception
Schottky clamped for high performance
The DM74LS138 decodes one-..
Rs34.00
Model: BE-000615
Features:
Contains Two Multiplexers To Select Data Inputs Based on Data Select Inputs
Performs Parallel to Serial Conversion
Low Power
Operating Temperature up to 70oC
Standard TTL Switching Voltages
Each of these data selectors/multiplexers contains inverters and drivers to suppl..
Rs21.00
Model: BE-000616
Features:
Single 8-bit Shift Register with Gated Serial Inputs and Asynchronous Clear
Fully Buffered Clock
Clock Frequency up to 36MHz
Operating Temperature up to 70oC
Standard TTL Switching Voltages
General Description:
These 8-bit shift registers feature gated serial inputs a..
Rs32.00
Model: BE-000617
Features:
Parallel Inputs and Outputs
Four Operating Modes, Synchronous, Right Shift, Left Shift and Pause
High Speed up to 25MHz
Positive Edge Triggered Clocking
Standard TTL Switching Voltages
General Description:
This bidirectional shift register is designed to incorporate..
Rs21.00
Model: BE-000618
Features:
Four Independent OR Gates
Standard Pin Configuration
Fast Switching Times
Operating Temperature up to 70oC
Standard TTL Switching Voltages
General Description:
This device contains three independent gates each of which performs the logic OR fucntion.
Rs21.00
Model: BE-000619
Features:
Accepts Four Line of BCD Input and Converts this to Seven Open Collector Outputs
Open Collector Outputs require Pull-Up Resistors
Lamp Test Input
Operating Temperature up to 70oC
Standard TTL Switching Voltages
General Description:
The 74LS47 accepts four lines of BCD..
Rs38.00
Model: BE-000620
Features:
Two independent Negative Edge Triggered JK Flip-Flops
Standard Pin Arrangement
Fast Switching Times
Operating Temperature up to 70oC
Standard TTL Switching Voltages
General Description:
This device contains two independent positive-edge-triggered D flip-flops with com..
Rs21.00
Model: BE-000526
The 74LS90 is a simple counter, i.e. it can count from 0 to 9 cyclically in its natural mode.
It counts the input pulses and the output is received as a 4-bit binary number.
The binary output is reset to 0000 at every tenth pulse and count starts from 0 again.
A pulse is also generated (pro..
Rs33.00
Model: BE-000622
General Description:
The 74LS95 is a 4-bit Shift Register with serial and parallel synchronous operating modes. The serial shift right and parallel load are activated by separate clock inputs which are selected by a mode control input. The data is transfered from the serial or parallel D inpu..
Rs107.00
Model: BE-000587
Description This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for the elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can..
Rs34.00
Model: BE-000567
The LM7809 series of three terminal positive regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essenti..
Rs27.00
Model: BE-000588
Description The LM7812 series of three terminal positive regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, makin..
Rs13.00
Model: BE-000680
General Description:
The LM7815 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are inte..
Rs61.00
Model: BE-000681
General Description:
The LM7905 (3-terminal regulators) is available with fixed output voltage of b5V. These devices need only one external component a compensation capacitor at the output. The LM79XX series is packaged in the TO-220 power package and is capable of supplying 1.5A of output curr..
Rs16.00
Model: BE-000597
FEATURES:
Current transfer ratio
(CTR: MIN. 50% at I=5mA, Vce=5V)
High isolation voltage between input and output
APPLICATIONS:
Computer terminals
System appliances, measuing instruments
Registers, copiers, automatic Vending machines
Electric home appliances, s..
Rs11.00
Model: BE-000506
DESCRIPTION:
Analog to digital converters find huge application as an intermediate device to convert the signals from analog to digital form. These digital signals are used for further processing by the digital processors. Various sensors like temperature, pressure, force etc. convert the phys..
Rs175.00