Search Criteria
Products meeting the search criteria
Model: BE-000129
DESCRIPTION:
Compared to other versions of the Arduino using a separate USB-Serial converter chip, the Leonardo innovatively uses a single-chip solution. Only with a Atmega32u4 USB communication and control. The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB co..
Rs445.00
Model: BE-000312
Technical parameters:
1. Supply voltage: DC 7V-15V
2. Output power: 10w + 10w (8 load)
3. Efficiency: 90%
4. Shutdown Current: 4uA
5. Quiescent current; 20mA
6. SNR: 86%
7. Total harmonic distortion: 5W / 1KHz / 8 ---- 0.1%
8. Frequency range: 20Hz-20KHz
9. Input impedance..
Rs169.00
Model: BE-000232
DESCRIPTION:
Itty-bitty U.FL SMD connector. Great for tight PCB layouts that require antenna connections.
Rs9.00
Out Of Stock
Model: BE-001354
FEATURES:
Amp LED Panel Meter W Current Transformer Digital AC Dual Display 300V 100A Volt
Measuring Range:AC 80~300V , AC 0~100A
Display Type:Digit RED & GREEN LED
Resolutions:±1%FS +2 Digit
Operating Temperature:-10 ºC ~65 ºC
Operating Humidity:35~85% RH
Rs99.00
%20R3%20BOARD+USB%20CABLE%20For%20ARDUINO-243x243w.JPG "ATMEL ATMEGA 2560 MEGA2560-16AU (16 Mhz) R3 BOARD")
Model: BE-000104
Technical Specification
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage 7-12V (recommended power 7.5 V or 9 V.)
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
F..
Rs1,189.00
Model: BE-000313
DESCRIPTION:
The power amplifier circuit board designed using the official standard. the chip uses a selection of US imports original Longding micro Class D amplifier chip. Good product chip is necessary and the majority of music lovers to share. this is our consistent philosophy! The amplifier w..
Rs195.00
Model: BE-001459
FEATURES:
Short circuit protection
Overcharge protection
Over-discharge protection
Overcurrent protection
Can be applied to various 3.7V lithium core
Compact size and lightweight
Ensure the security of battery pack
Rs78.00
Out Of Stock
Model: BE-001355
DESCRIPTION:
Displays the AC voltage and current simultaneously by LED digital tube.
Including one independent small precise current transformer, you can lengthen the cable.
Easy measurement, just connect to power and lead the wire through the current transformer.
Wide measurement voltage..
Rs705.00
Model: BE-001361
Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection PCB BoardSuitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)Product Size: 64mmx20mmx3.4mmMaterial:MetalCharging voltage: 12.6VMaximum output current: 20AMaximum output po..
Rs69.00
Out Of Stock
Model: BE-001357
FEATURES:
100% Brand New
Small size and easy installation
Easy reading with Blue LCD back light Digital Display
Having a dual measurement of AC voltage, It can measure AC 300-500V
Widely used in substation automation, distribution automation, test equipment and ..
Rs787.00
Out Of Stock
Model: BE-000216
DESCRIPTION:
Gold-plated machined brass construction
Gold-plated contacts - teflon insulator
Great for wireless router, access point repair or similar projects
Connect high gain IPX to SMA
SPECIFICATION:
Connector: IPX IPEX to RP-SMA female jack(center male pin)
Cable type: 1.13 U.FL
L..
Rs76.00
Out Of Stock
Model: BE-000132
Technical Specification
A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
CPU clock at 84Mhz
96KBytes of SRAM
512KBytes of flash memory for code
A DMA controller, that can relieve the CPU from doing memory intensive tasks.
Specificati..
Rs3,699.00
Out Of Stock
Model: BE-000224
DESCRIPTION:
Ultra volume:23*24MM Weight 0.45 grams
Excellent noise suppression,you will hear any noise without connecting input audio.
Dual-channel stereo,only needed 5V power supply can input 5W+5W power,it can drive 4 ,8 little speaker directly,with large output power,..
Rs129.00
Model: BE-000357
DESCRIPTION:
The LilyPad For Arduino is a microcontroller board designed for wearables and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.
The LilyPad Iduino can be programmed with the software of Arduino. *Note*, the LilyP..
Rs345.00
Model: BE-000108
AC/DC12V TDA7297 REV A LOW NOISE AUDIO AMPLIFIER BOARD 2*15W Dual-Channel STEREO
Product description:
A single set of power supply 12 v power supply TDA7297 amplifier board
Double track/stereo
Use 12 v / 2 a
15 w + 15 w output power
Pe..
Rs244.00
Model: BE-000286
DESCRIPTION:
1, omron 5V solid state relay omron 240V2A output resistance fuse 240V2A
2, size: 55 * 33 *25(length * width * height), net weight: 21.5g
3, input power supply: 5V DC (160MA)
4, input control signal voltage:
(0-2.5V Status low level relay ON)
(3.3-5V state high level r..
Rs189.00
Model: BE-000308
DESCRIPTION:
100% brand new and high quality
Working voltage: 6 to 18V
The Board Size: 4.5x 3.3x 2.7cm
The on-board TDA7297 audio power amplifier chip. double channel 15W+15W.
speaker for European 4-8 10-50W use
Main pin has led chip. convenient external control device. the..
Rs281.00
Model: BE-000358
DESCRIPTION:
8K Byte of In-System Programmable Program Memory Flash
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAMDiameter:25mm
Rs410.00
Model: BE-000222
DESCRIPTION:
Built-in high precision voltage detection circuit.
Connect to the charger terminals which using high pressure device.
Built-in three over current detection circuit (1 over current, 2 over current ,load short circuit)
Through the MOS tube ,it can control the battery charging ..
Rs132.00
Model: BE-001524
DESCRIPTION:
Size：21mm*28m
Clock Speed 16 MHz
Operating Voltage 5V DC
Digital I/O Pins 10
PWM Channels 4
Analog Input Channels 5
UART 1
I2C 1
Micro USB 1
Flash Memory 32 KB of which 4KB used by bootloader
SRAM 2.5 KB
EEPROM 1 KB
Microcontroller ATmega32u4
Rs805.00
Model: BE-000902
DESCRIPTION:
TDA8932 35W mono digital amplifier module
The board uses a high-performance digital amplifier TDA8932 chip, a small size, high efficiency, high power, good sound quality, without additional installation of radiator, very suitable for the transformation of active speakers, electro-..
Rs289.00
Model: BE-001364
DESCRIPTION:
Low power inverter, massager battery pack, LED light standby power supply, electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note: 3A current discharge products above, the battery discharge rate to 3C or more.
Magnification c..
Rs122.00
Model: BE-000349
DESCRIPTION:
LM75A is a I2C interface, temperature sensor, in the temperature range -55 C ~ + 125C The temperature was directly converted to a digital signal,
and can achieve accuracy of 0.125 C. MCU can be read directly through the I2C bus data in its internal registers, and through I2C d..
Rs99.00
Model: BE-000305
DESCRIPTION:
SSR Application:
With a switch no spark. no noise.high switching speed.anti-corrosion.moisture-proof.
anti-vibration.long life.high reliability.electromagnetic compatibility and other characteristics.
It can be widely used in aerospace.marine.household appliances.machine tools.tel..
Rs207.00
Model: BE-001485
DESCRIPTION:
100% Brand New and High Build Quality
Long service life and high reliability
Highly reliable, compact size designed to offer users maximum simplicity
Fast switching
Reduced electromagnetic interference
TECHNICAL PARAMETERS:
Output voltage: AC 24-380V
Outpu..
Rs245.00