Search Criteria
Products meeting the search criteria
Model: BE-000177
DESCRIPTION:
Sensitive material MQ-9 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating ) to detect carbon monoxide, conductivity sensors with carbon monoxide in the air increased with increasing gas co..
Rs89.00
Model: BE-000175
DESCRIPTION:
MQ-7 gas sensor is sensitive material used in clean air, low conductivity tin dioxide (SnO2). Detection method using low temperature cycling (1.5V heating) detect carbon monoxide, airborne sensor conductivity increases with the increase of the concentration of carbon monoxide gas, hi..
Rs87.00
Hot
Model: BE-000187
DESCRIPTION:
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
This chip is like a rotary switch - it internally routes the common pin
(COM in the schematic, SIG on the board)to one of 16 channel pins (CHANxx).
..
Rs47.00
Out Of Stock
Model: BE-000940
DESCRIPTION:
The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. ..
Rs109.00
Model: BE-000510
Single-Chip USB to UART Data Transfer:
Integrated USB transceiver; no external resistors required
Integrated clock; no external crystal required
Integrated 1024-Byte EEPROM for vendor ID, product ID, serial number, power descriptor, release number, and product description strings
On-chip..
Rs128.00
Out Of Stock
Model: BE-000911
DESCRIPTION:
This is a small micro switch sensor designed for the Arduino. It could be directly connected to the IO Expansion shield. It integrates the pull-up resistor and the status indicator LED onboard. That makes it easier for testing.The miniature snap-action micro switch with roller lever ..
Rs35.00
Model: BE-001513
Performance and highlights:
Voltmeter wide range DC4.5 ~ 40V.
5V/2A output current (Only when the input voltage is 6.5 ~ 40V, it can output 5V).
A key ("Output Enable" button) switch USB output, a key ("low-power" button) to enter the ultra-low power.
Voltmeter can be artificial..
Rs162.00
Hot
Model: BE-000230
DESCRIPTION:
100% brand new and high quality
Use a dedicated benchmark IC, and high-precision current sensing resistor,
High output current, the max output current can reach 9A.
Low output ripple , high frequency capacitor reduces output ripple.
Suitable for LED driver.
SPECIFIC..
Rs285.00
Model: BE-000231
PARAMETERS:
Module Name: 600W boost constant current module
Module Properties: non-isolated step-up module (BOOST) (not down)
Input voltage: two selectable input voltage range, (by jumper selection board)
1. 8-16V input (for three strings of lithium batt..
Rs755.00
Hot
Model: BE-000322
DESCRIPTION:
DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module at a lower cost. superior performanc..
Rs59.00
Out Of Stock
Model: BE-001473
SPECIFICATIONS:
Converter type: DC-DC
Input voltage: 5~23V (Best voltage 20V)
Output voltage: 0V~16.5V (Continuously adjustable)
Peak current: 3A
Mainboard size: 50mm x 30mm x 12mm(LxWxH)
Display module: STN LCD
LCD size: 37.5mm x 17.0mm(LxW)
LCD accuracy: 1%
Conversion efficie..
Rs458.00
Model: BE-000019
Product description:
LM2596 LM2596S ADJ POWER SUPPLY DC-DC STEPDOWN module 5V/12V/24V adjustable Voltage regulator 3A
DIY mobile power supply, car power, communications equipment power supply, etc.
..
Rs99.00
Model: BE-000016
Description:
This is a low cost humidity and temperature sensor with a single wire digital interface.
The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature.
DHT11 output calibrated digital signal. It utilizes ..
Rs53.00
Model: BE-000013
DESCRIPTION:
Can detect ambient humidity and temperature
sensor DHT11
Humidity measuring range: 20%-95% (range 0-50 degrees) and humidity measurement error: +-5%
Temperature measurement range: 0-50 ..
Rs58.00
Model: BE-000957
FEATURES:
Working voltage:DC4V-28V
Working current:<20mA
Display: 0.28" Two color blue and red
Measuring range:DC 0-200V 0-10A Built-in shunt
Refresh rate: about 1S / 3times
Measure accuracy:
Operating temperature: -10 to 65° c
Working pressure: 80 to 106 kPa
size :4..
Rs533.00
Model: BE-001597
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
Rs1,059.00
Model: BE-000390
DESCRIPTION:
Freezer Temperature Controller Fast Using
1.1 Please check the wiring according to the user manual, caution don’t over voltage or over load.
1.2 Setting mode:press “SET” key for 5sec, the meter will display P0, then press “SET” key again to select “H” heating mode or “C” coolin..
Rs631.00
Hot
Model: BE-000120
Product description:
100% Brand New.
Size: 48mm x 29mm x 21mm.
Display color: Red & Blue LED (dual display).
Display: 0.28" LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Minimum resolution (V): 0.1V.
..
Rs99.00
Model: BE-001470
DESCRIPTION:
Sonoff and Slampher are smart WiFi Wireless products which will connect with your home appliances and lights by Wi-Fi, allowing you to remotely turn devices on or off, set timing schedules, check devices status through the APP in your smart phone.Slampher can connect to light bulbs w..
Rs1,154.00
Model: BE-000530
The DS1307 Serial Real-Time Clock is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially via a 2-wire, bi-directional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end ..
Rs18.00
Model: BE-000880
One side of the adapter board is SOP816 (1.27mm pitch) to DIP16 (2.54mm pitch), the other side is SSOP16 / TSSOP16 (0.65mm pitch) to DIP16 (2.54mm pitch). It is dual-side, unique design which can be compatible with more ICs.The 1x8P gold-plated pin header is durable, easy on the tin. After soldering..
Rs25.00
Model: BE-000393
New ELM327 V2.1 OBD2 OBD II CAN-BUS Bluetooth Car Auto Diagnostic Interface Scanner
Highlights:
The newly developed wireless scan tool.
It supports all OBD-II protocols.
It is the latest vers..
Rs620.00
%20ESP8266%20remote%20serial-250x250.jpg "ESP-12E (replace ESP-12) ESP8266 remote serial Port WIFI wireless module")
Hot
Model: BE-000336
DESCRIPTION:
ESP8266-12E is the enhanced version. in comparison with ESP8266-12.
It has the perfect the peripheral circuit. and can enhance the impedance matching.
The output signal is better. both stability and anti-interference ability. has been greatly promoted.
For the user for..
Rs98.00
Hot
Model: BE-001366
DESCRIPTION:
ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chip..
Rs345.00
Model: BE-001368
DESCRIPTION:
ESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.
The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technolog..
Rs1,110.00