Search Criteria
Products meeting the search criteria
Model: BE-000272
DESCRIPTION:
The K9F1G08U0C NandFlash Board is a development solution for NandFlash memory with 8-bit parallel interface. It provides your application with extra 1G Bit (128M x 8 Bit) memory.
K9F1G08U0C, 8-bit parallel interface
Rs808.00
Out Of Stock
Model: BE-001403
DESCRIPTION:
- Color: Blue
- Material: Glass fiber
- Features: Storage module, K9F1G08U0C, control interface
- The K9F1G08U0C NandFlash Board is a development solution for NandFlash memory with 8-bit parallel interface. It provides your application with extra 1G Bit (128M x..
Rs338.00
Model: BE-000191
DESCRIPTION:
Chip: KA2284
Supply voltage: 3.5V-12V
The magnitude of the level can be adjusted
AC and DC signals can be controlled by jumper
PCB board size: 29 (mm) x21 (mm)
Adjustable span of power level
AC and DC signals can be controlled by jumper
PCB board size: 29mm x 21mm
..
Rs121.00
Out Of Stock
Model: BE-000315
DESCRIPTION:
100% brand new and high quality
8 Bits. 8 keys. 8 LEDs. 8 digital tubes. common cathode LED digital tube.
With TM1638 Chip. this module gather more than three common SCM peripheral circuits.
The advantage is only three IO ports will be occupied when it drives.
SCM doesn't n..
Rs119.00
Out Of Stock
Model: BE-000955
PRODUCT DESCRIPTION:
Hot Kid GPS Smart Watch Wristwatch SOS Call Location Finder Locator Device Tracker for Kid Safe Anti Lost Monitor Baby Gift
Three colour Available(Blue, Pink, Orange)
Please mail After Order or we send by Our choice.
..
Rs671.00
Out Of Stock
Model: BE-000203
DESCRIPTION:
KKMulticopter controller is a flight control board for up to 6 Rotor Aircraft. Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega168PA IC. The Atmega168PA IC u..
Rs1,310.00
2-3 Days
Model: BE-001790
Description:RGB LED module LED is made of a plug-in full-color, by R, G, B three-pin PWM input voltage can be adjusted in three primary colors (red / blue / green) strength in order to achieve full color mixing effect. Control module with cool lighting effects can be achieved. Product parameter..
Rs35.00
Model: BE-000112
Product description:
The shield contains two L293D motor drivers and one 74HC595 shift register.
The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
The output enable of the L293D is directly connected to PWM outputs of ..
Rs115.00
Model: BE-000388
DESCRIPTION:
onboard two the L9110S motor control chip
the module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
the module input voltage :2.5-12V
the 800mA continuous current output capability per channel
1. Low static work current
2..
Rs85.00
Out Of Stock
Model: BE-000453
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs189.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000268
DESCRIPTION:
Output current: 1.5A (minimum), 2.2A (typical)
The input and output voltage difference (VIVO): 40Vdc (max)
Output adjustable voltage range: 1.2 ~ 37V
Working temperature: 55 ~ C to +150 ~ C
Current output: 1.5A
Voltage input: 4.2 ~ 40 V
Working temperature: 0 ~ 125 C ~..
Rs67.00
Model: BE-000307
DESCRIPTION:
On-board LM386 Chip
20 multiplier benefits circuit design
on-board speaker wiring Block
on-board 10K variable resistor. you can adjust the volume of the enlarged
On-board power indicator
the chip pin leads. can be directly input audio signal
Operating voltage: 5 ~ 12V
Rs40.00
Out Of Stock
Model: BE-000208
DESCRIPTION:
A dedicated and well-designed data logging shield for Arduino.
It is easy to assemble and customize, also equipped with extensive documentation and libraries.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD c..
Rs145.00
Model: BE-000183
DESCRIPTION:
Input voltage range: 3.0-30V Note: 30V maximum voltage limit must be aggressive in order to avoid accidental damage.
Output voltage range:3.5-30V &nbs..
Rs396.00
Model: BE-000301
Description:
Main chip: ISD1820
Size: Approx. 38 x 42.5mm / 1.49 x 1.67 inch
Working voltage: DC 3-5V
Power supply: 3-5V, can be connected to row pin
Recording/playback control mode: Key control or singlechip, IO has drawn the line of control;
Main feature:
Convenient 10s re..
Rs122.00
Out Of Stock
Model: BE-001710
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Model: BE-001711
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Model: BE-001712
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Model: BE-001713
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Model: BE-001714
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Model: BE-001715
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Model: BE-001716
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00
Out Of Stock
Model: BE-001717
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00