Search Criteria
Products meeting the search criteria
Out Of Stock
Model: BE-000203
DESCRIPTION:
KKMulticopter controller is a flight control board for up to 6 Rotor Aircraft. Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega168PA IC. The Atmega168PA IC u..
Rs1,310.00
Out Of Stock
Model: BE-000356
DESCRIPTION:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro/Acc: InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6++
Built-in airplane mode:
Dualcop..
Rs3,121.00
2-3 Days
Model: BE-001790
Description:RGB LED module LED is made of a plug-in full-color, by R, G, B three-pin PWM input voltage can be adjusted in three primary colors (red / blue / green) strength in order to achieve full color mixing effect. Control module with cool lighting effects can be achieved. Product parameter..
Rs35.00
Model: BE-000112
Product description:
The shield contains two L293D motor drivers and one 74HC595 shift register.
The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
The output enable of the L293D is directly connected to PWM outputs of ..
Rs115.00
Model: BE-001300
DESCRIPTION:
The Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your board, controlling the speed and direction of each one independently. You can al..
Rs598.00
Model: BE-000388
DESCRIPTION:
onboard two the L9110S motor control chip
the module can simultaneously drive two DC motors or a 4-wire 2-phase stepper motor
the module input voltage :2.5-12V
the 800mA continuous current output capability per channel
1. Low static work current
2..
Rs85.00
Model: BE-000028
DESCRIPTION:
The board has 6 male pins and 2 double terminals.
The motors connect to the 2 terminals. In the middle of the male pins are the VCC and GND pins. This is the input voltage for the L9110 chips. Some H-bridges like the L293 and L298 require a logic voltage and a separate voltage ..
Rs53.00
Out Of Stock
Model: BE-000453
DESCRIPTION:
A seven-segment display (SSD), or seven-segment indicator, is a form of electronic display device for displaying decimal numerals that is an alternative to the more complex dot-matrix displays. Seven-segment displays are widely used in digital clocks, electronic meters, and..
Rs189.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000268
DESCRIPTION:
Output current: 1.5A (minimum), 2.2A (typical)
The input and output voltage difference (VIVO): 40Vdc (max)
Output adjustable voltage range: 1.2 ~ 37V
Working temperature: 55 ~ C to +150 ~ C
Current output: 1.5A
Voltage input: 4.2 ~ 40 V
Working temperature: 0 ~ 125 C ~..
Rs67.00
Model: BE-000307
DESCRIPTION:
On-board LM386 Chip
20 multiplier benefits circuit design
on-board speaker wiring Block
on-board 10K variable resistor. you can adjust the volume of the enlarged
On-board power indicator
the chip pin leads. can be directly input audio signal
Operating voltage: 5 ~ 12V
Rs40.00
Out Of Stock
Model: BE-000208
DESCRIPTION:
A dedicated and well-designed data logging shield for Arduino.
It is easy to assemble and customize, also equipped with extensive documentation and libraries.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD c..
Rs145.00
Model: BE-000183
DESCRIPTION:
Input voltage range: 3.0-30V Note: 30V maximum voltage limit must be aggressive in order to avoid accidental damage.
Output voltage range:3.5-30V &nbs..
Rs396.00
Model: BE-000301
Description:
Main chip: ISD1820
Size: Approx. 38 x 42.5mm / 1.49 x 1.67 inch
Working voltage: DC 3-5V
Power supply: 3-5V, can be connected to row pin
Recording/playback control mode: Key control or singlechip, IO has drawn the line of control;
Main feature:
Convenient 10s re..
Rs122.00
Model: BE-000026
This product is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
Can be used to download MCU types:
STC single-chip microcomputer
STM32 microcontroller
NXP microcontroller
Renesas MCU
NEC MCU
Com..
Rs46.00
Hot
Model: BE-000055
DESCRIPTION:
1 on-board MAX485 chip is a low power consumption for RS-485 communications, Slew-Rate Transceiver
2 the board received 5.08 (mm) pitch 2P terminal, convenient RS-485 communication wiring
3 the chip has d..
Rs35.00
Model: BE-000087
Product description:
MAX7219 is an integrated serial input / output common-Cathode display drivers , which connects the microprocessor 7-segment digital LED display with 8 digits , bar graph can also be connected monitor or 64 separate LED. On type B BCD encoder includes an on-ch..
Rs119.00
Out Of Stock
Model: BE-000900
DESCRIPTION:
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
A single module can drive a 8x8 dot matrix common cathode
Operating Voltage: 5V
Dimensions: 12.8X12.8X1.3cm/
Fixing screws with 64 holes with a diameter 3mm
Module with input and output int..
Rs269.00
Model: BE-000102
DESCRIPTION:
Circuit-Test Solder-less Breadboards allow you to easily assemble and test circuits without the use of solder.
providing you with a quick and reliable method of prototyping.
Electrical connection is made by inserting your component lead through the 0.1" spaced..
Rs79.00
Hot
Out Of Stock
Model: BE-000331
DESCRIPTION:
Rs166.00
Model: BE-000964
DESCRIPTION:
100% Branded And High Quality
Perfect For Arduino Shield Prototyping and Testing
Plastic Housing, Metal Contact Clips
Voltage / Current : 300V / 3-5A
Mini Universal Bread Board
400 Solder-less Tie Points
Ideal for Experimenting With Circuit Design In Labs
2 Power Lan..
Rs42.00
Out Of Stock
Model: BE-000257
DESCRIPTION:
For Arduino MEGA / MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.
SOP28 SMD component package to be more handy with Arduino electronics enthusiasts will not be ..
Rs149.00
Model: BE-000032
Product description:
The Arduino MEGA has many more I/O pins (54 Digital pins and 16 Analog pins)than a standard Arduino. This shield also has connectors specifically for some external devices like an SD Card, Radio communications (Bluetooth and others). It also has an option to po..
Rs167.00
Hot
Model: BE-000038
Product description:
Product Model: MG90S
Working torque: 2KG/cm
Reaction speed: 0.11 seconds / 60 degrees (4.8V)
Operating temperature: 0 -55
The deadband setting: 5 microseconds
Plug Type: JR, FUTABA General
Rotation angle: 36..
Rs117.00