Search Criteria
Products meeting the search criteria
Model: BE-000435
DESCRIPTION:
EM4100 Standard
Compatible with all ID door access devices or ID reader
Made up of PVC
Waterproof
Contactless transmission of data,Only can be read,can't be rewritten,or used to copy other RFID cards
With One USB RFID card reader/issuing device offered,it can read out th..
Rs17.00
Model: BE-000271
DESCRIPTION:
Color: Blue
- Material: Glass fiber
- Features: Storage module, S29GL128P, control interface
- Provides your application with extra 128M bit memory
Rs1,077.00
Out Of Stock
Model: BE-000260
DESCRIPTION:
It is easily interfaced as a peripheral to your for Arduino sensor shield module. Through programming, you can read and write to the SD card using your for Arduino.
FEATURES:
Brand new
Input Voltage: 3.3V/5V
With all SD SPI Pins out :MOSI, SCK, MISO and CS ,for further c..
Rs40.00
Model: BE-000496
APPLICATION:
This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.
Rs44.00
Out Of Stock
Model: BE-000338
DESCRIPTION:
This PCB can generate PWM signal using SG3525A IC. Datasheet
Used to control power circuit. LED dimming etc.
1. onboard SG3525A PWM control chip
2. on-board 78M05 regulator chip. providing a reliable reference voltage
3. onboard two precision adjustable ..
Rs98.00
Model: BE-000969
FEATURES:
Ultra-compact, harmonic too easy to FCC / CE certification
Penetrating ability SI4432 IC, stable performance
Frequency Range: 433.92M
Sensitivity up to-121dBm
Maximum output power: 20dBm
Data transfer rate :0.123-256kbp..
Rs259.00
Model: BE-001547
DESCRIPTION:
SMT to DIP 0805 0603 0402 SMT to DIP Capacitor Resistance LED SMT transfer board.
Rs36.00
Hot
Model: BE-000328
DESCRIPTION:
SN65HVD230 can be used under high interference environment.
The device has the ability to send and receive good at different rates. and its main features are as follows:
Fully compatible with ISO11898 standard;
High input impedance. allowing 120 nodes;
Low current standby m..
Rs122.00
Out Of Stock
Model: BE-000441
DESCRIPTION:
Voltage: 12V DC
Current: 500mA
Pressure: 0.02 - 0.8Mpa
Valve type: diaphragm (operated by Servo)
Operation mode: normally closed
Inlet and outlet: hose barbs for 1/2" (outer diameter) hose
Fluid temperature: 1-100 ℃
Material:Metal & Plastic
Usage: water and low..
Rs300.00
Model: BE-000294
DESCRIPTION:
The CJMCU-SX1509 can leverage your I2C interface for 16 extra channels of GPIO. And that’s not all! This handy device also contains a fully programmable LED driver and a keypad scanning engine which enables continuous keypad monitoring of up to 64 keys! Since the I/O banks can operat..
Rs323.00
Out Of Stock
Model: BE-001371
DESCRIPTION:
The OPA1632 is a fully differential amplifier used to drive high-performance audio analog-to-digital conversion (ADCs). The highest audio quality , which provides very low noise and output drivers , this application is optimized for the de..
Rs4,559.00
Model: BE-000343
DESCRIPTION:
Use for:
The electricity meter pulse data sampling
Fax machine. shredder paper detection
Obstacle detection
Black and white line detection
Module features:
Using infrared reflection sensors TCRT5000
Test reflection distance: 1mm to 25mm
Clean and 3. the compar..
Rs32.00
Out Of Stock
Model: BE-000300
Description:
Superior sound quality.Onboard 2W amplifier(5V power of up to 3W) is directly connected to the speaker (recommendation 4 ω 3W speakers),3.5mm gold plated headphone jack can connect with headphones or external audio.
With a MicroUSB port.Through the mobile phone data ..
Rs220.00
Out Of Stock
Model: BE-000915
DESCRIPTION:
1, the voltage comparator LM393 chip on board and the detection temperature probes
2 support 5 V / 3.3 V Input Voltage
3 board signal output instructions, output valid signal is high, while LED lights, the output signal can be directly connected to the microcontroller IO
4, ..
Rs56.00
Model: BE-000330
DESCRIPTION:
1. TJA1050 CAN controller interface chip
2. The chip pin has been commonly used derivation. convenience for the connection
3. Pin 5 v power supply
4. The PCB board size: 22 (mm) x11.5 (mm)
Operating modes and control logic
SN65HVD230 high speed. slope and wait three different ..
Rs66.00
Out Of Stock
Model: BE-000295
DESCRIPTION:
For all of you out there who want to control 24 channels of PWM, we salute you! We also would like you to check out this breakout board for the TLC5947 PWM driver chip. This chip can control 24 separate channels of 12-bit PWM output. Designed (and ideal) for LED control, this board i..
Rs489.00
Out Of Stock
Model: BE-000914
DESCRIPTION:
Wavelength
650nm
Data Rate
15Mbps
Power - Output
-21 ~ -15dBm
Voltage - Supply
2.7 V ~ 3.6 V
Applications
Digital Audio
Current - Supply
8mA
Rs337.00
Model: BE-000456
DESCRIPTION:
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will brid..
Rs250.00
Out Of Stock
Model: BE-000870
DESCRIPTION:
Pair of Ultrasonic compact Transmitter & Receiver sensor which can be used to build object sensor, distance sensor, motion sensor etc with high-performance characteristics. Standard operating frequency (40Khz) and good sensitivity. Ideal for robot applications, alarm sensors, ran..
Rs89.00
Model: BE-000127
Product description:
ProtoShield prototype expansion board with two buttons and two LED circuit can be used directly,
all of the pins and the power leads are ve..
Rs69.00
Out Of Stock
Model: BE-000332
DESCRIPTION:
1. supports Google Android ADK. support Android phones: G1. Nexus One. Nexus S. Motorola Droid X
2. (phone system needs to be upgraded to Android 2.3.4. you need to upgrade to the Tablet PC Android 3.1)
3. Provide compiled APK installation package source files and ADK
4. com..
Rs899.00
Out Of Stock
Model: BE-000289
DESCRIPTION:
This USB to serial converter is very useful where there is no physical RS232 port or COM port is available & you want to communicate with a system where only RS232 port is available. This converter presents itself to computer as if it is a COM port. It’s behaviour is as good as a..
Rs78.00
Model: BE-001478
SPECIFICATIONS:
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your designs
Available for Linux, Mac, WinCE and Windows (XP, 2003), Vista, Win 7
Black cable-----GND
Green..
Rs143.00
Model: BE-000325
DESCRIPTION:
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Dual 3.3V and 5V Power output. work with 3.3v and 5v target device.
The mini module is designed specifically for STC download and for ARDU..
Rs74.00
Model: BE-000163
DESCRIPTION:
Support devices with RS485 interface: surveillance cameras, video capture device, fingerprint attendance machine, PBX, CNC machine, microcontroller, etc.
Specification:
Standard: USB2.0 standard, backward compatible, in line with the standard RS485
Directio..
Rs159.00