Search Criteria
Products meeting the search criteria
Out Of Stock
Model: BE-000484
DESCRIPTION:
A small audio speaker that is ideal for radio and amplifier projects and is small enough to fit in robot projects.
Features:
Small Size
Power rating: 0.25W
Impedance: 8 ohm
Diameter: 40mm / 4cm approx
Thickness: 5mm approx
Rs29.00
Out Of Stock
Model: BE-001426
DESCRIPTION:
CJMCU-219 is a module with the I2C interface of zero drift and bi-directional current/power monitoring and control integrated circuit (IC), further expand the TI energy-saving electronic products.INA219 has the industry's highest precision and the small size, not only can monitor the..
Rs179.00
Out Of Stock
Model: BE-000249
FEATURES:
1.Wide operating voltage: AC110V - 250V.
2.Way system:Two lines, the the ordinary manual switch connection
3.Then ordinary inductive switch then can not load: energy saving lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps (inductive with QiHuiQi), e..
Rs546.00
Model: BE-000409
DESCRIPTION:
IRFZ44 is a n channel MOSFET from International Rectifier. It has maximum VDSS rated at 55V and can handle continuous drain current up to 49Amps at 250C. It has typical power dissipation of 50W.
SPECIFICATIONS:
Maximum VDSS : 55V
Maximum Drain current: 49A at 250C
RDS(on..
Rs39.00
Out Of Stock
Model: BE-001418
JSN-SR04T Integrated Waterproof Ultrasonic Ranging Module Ultrasonic Reversing Radar Sensor Original
BASIC WORKING PRINCIPLE:
1. Using IO port TRIG trigger location, to the high level signal of at least 10us;
2. Module automatically sends 8 40KHz Fang Bo, automatic detecting whether a signal return;
3. A signal return, a high level is output through the IO port ECHO, the tim..
Rs699.00
Model: BE-000191
DESCRIPTION:
Chip: KA2284
Supply voltage: 3.5V-12V
The magnitude of the level can be adjusted
AC and DC signals can be controlled by jumper
PCB board size: 29 (mm) x21 (mm)
Adjustable span of power level
AC and DC signals can be controlled by jumper
PCB board size: 29mm x 21mm
..
Rs121.00
Out Of Stock
Model: BE-000955
PRODUCT DESCRIPTION:
Hot Kid GPS Smart Watch Wristwatch SOS Call Location Finder Locator Device Tracker for Kid Safe Anti Lost Monitor Baby Gift
Three colour Available(Blue, Pink, Orange)
Please mail After Order or we send by Our choice.
..
Rs671.00
Model: BE-000537
These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low i..
Rs20.00
Model: BE-000529
The LM2576 series of regulators are monolithic integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. The LM2576 series offers a high-efficiency replacement for popular three-t..
Rs18.00
Out Of Stock
Model: BE-001410
DESCRIPTION:
Constant Current Constant Voltage (CC CV) DC Buck, or switching non isolated asynchronous CC CV converter. based on the specialised IC LM2596S, output regualtion driven by a TI AOP, leading to a very stable regulation. Sanyo Low ESR Solid Caps, very low output ripple (5-10mV on avera..
Rs81.00
Hot
Model: BE-000377
DESCRIPTION:
Input voltage: 4.5-50V,
The volume of L 40 * W 21.5 * H 13.5mm (including potentiometers).
Input: IN+ input positive IN- input negative
Output: OUT+ output positive OUT- output negative
Adjustment method: first correct input power (between 4.5-50V) then multimete..
Rs34.50
Model: BE-000523
LM2596S 5.0 LM2596 NSC TO-263 3A Step-Down 5V Regulator
Rs60.00
Hot
Model: BE-000046
High performance DC to DC step-down adjustable power supply module, switching regulator.
1. Input voltage: 3.2-40V
2. Output Voltage: 1.5-35V (adjustable) ,input must least high 1.5V than output
3. Output current: rated current 2A, maximum 3A (need to add heat sink), if the output pow..
Rs46.00
Model: BE-000674
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Rs6.00
Out Of Stock
Model: BE-001328
DESCRIPTION:
Low power small volume fast start and high cost performance!
HLK-M30 is a new low-cost embedded electronic UART-WIFI (serial port - wireless network) modular. This product converts between the user's serial port wireless network (wifi) to achieve the network standard built-i..
Rs1,230.00
Out Of Stock
Model: BE-000169
DESCRIPTION:
Detect all sorts of combustible gases, natural gas (methane), bottled gas (propane), LPG (liquefied petroleum gas), coal gas, including town gas, small and compact, the design and color makes it ideal for use in the home, small commercial properties, and recreational v..
Rs914.00
Model: BE-000183
DESCRIPTION:
Input voltage range: 3.0-30V Note: 30V maximum voltage limit must be aggressive in order to avoid accidental damage.
Output voltage range:3.5-30V &nbs..
Rs396.00
Out Of Stock
Model: BE-001503
DESCRIPTION:
The power supply is a kind of high-efficiency voltage automatically regulator.Whatever is the input voltage value,the output voltage can be maintained constant. Forexample,set the output to 12V, then the variation of the input voltage in the range of 5-32V, the output voltage in the ..
Rs1,421.00
Out Of Stock
Model: BE-001710
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Model: BE-001711
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs15.00
Out Of Stock
Model: BE-001712
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Model: BE-001713
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs20.00
Out Of Stock
Model: BE-001714
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Model: BE-001715
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs25.00
Out Of Stock
Model: BE-001716
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of brass come in male-female or female-female forms.
In electronics they are frequently used to raise a printed-circuit ..
Rs29.00