Search Criteria
Products meeting the search criteria
Model: BE-000557
The 74HC245 is identical in pinout to the LS245.
The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs.
The HC245 is a 3-state noninverting transceiver that is used for 2-way asynchronous communication between data buses.
..
Rs18.00
Model: BE-000873
FEATURES:
Power: 500mW
SPECIFICATIONS:
For use in stabilizing and clipping circuits with high power rating.
Rs1.00
Out Of Stock
Model: BE-000259
DESCRIPTION:
Conversion level range: 1.8V-6V
Module size: 28mm X 27.5mm
Instructions:( for example 3.3V, 5V system conversion)
VCCA connect to 3.3V power supply
VCCB connected to 5V power supply
GND negative one, two power supply common ground
&nb..
Rs160.00
Out Of Stock
Model: BE-000422
DESCRIPTION:
An IC socket, or integrated circuit socket, is used in devices that contain an integrated circuit. An IC socket is used as a placeholder for IC chips and is used in order to allow safe removal and insertion of IC chips because IC chips may become damaged from heat due to soldering.
Rs3.00
Model: BE-000846
DESCRIPTION:
Relimate Wired Connector
8 pins
Rs17.00
Out Of Stock
Model: BE-001045
SPECIFICATIONS:
Pitch: 2.54 mm
Length: 20 cm
Rs23.00
Model: BE-000483
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 8
Color: Normally Light..
Rs25.00
Out Of Stock
Model: BE-001505
DESCRIPTION:
super current carrying capacity (maximum 8 A), to provide the strong power to your device!
Tight layout, limited space for you to make the biggest concessions
Additional radiator, no longer worry about equipment and higher temperature
SCOPE OF APPLICATION:
Can be us..
Rs195.00
Out Of Stock
Model: BE-000852
DESCRIPTION:
Relimate Wired Connector
9 pins
Rs22.00
Out Of Stock
Model: BE-000798
DESCRIPTION:
This is 2.54mm DIP Switch, It is designed to be used on a printed circuit board along with other electronic components and is commonly used to customize the behavior of an electronic device for specific requirements.
Specifications:
Position Number: 9
Color: Normally Light..
Rs25.00
Out Of Stock
Model: BE-001565
DESCRIPTION:
5 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps and lanterns, VCD, and other special configuration communications antenna and iron and tools antenna and other electronics products.
Great replac..
Rs89.00
Out Of Stock
Model: BE-000452
FEATURES:
Made of soft leather.
T fonts, with red and black connecting lines .
The lenght of line is about 6cm.
Excellent material, fine workmanship.
It is an environmental 9V battery buckle.
Rs5.00
Model: BE-001511
DESCRIPTION:
100% Brand New and High Quality
Cable Length: About 10cm
Hard plastic T-type connector
5.5x2.1mm connector
SPECIFICATION:
15cm stripped and tinned leads
1 red and 1 black for easy identification and soldering
Snap-on terminal connector for 9-volt bat..
Rs40.00
Out Of Stock
Model: BE-000423
DESCRIPTION:
Active buzzer with oscillation circuit built-in, the sound frequency is fixed but can only send out the voice of the single frequency.
The active buzzer work signal is DC
Rs11.00
Out Of Stock
Model: BE-000455
Fits the CPU/RAM, Network and Power chips on the Raspberry Pi
Pre-applied thermally conductive adhesive makes installation simple
Help keep your Pi cool while overclocking
SIZE:
14mm(L) x 14mm(W) x 5mm(H) - 1PC
9mm(L) x 9mm(W) x 4mm(H) - 2PC
Rs379.00
Model: BE-000178
DESCRIPTION:
Sensitive material MQ135 gas sensor is used in clean air low conductivity tin oxide (SnO2). When the sensor is kept in their environment
In the polluting gases , the conductivity sensor with increasing air pollution in gas concentration increases. Using a simple circuit can chan..
Rs93.00
Model: BE-000321
DESCRIPTION:
AMS1117 3.3V power supply module
1, on-board AMS1117-3.3 chip
2, the input voltage range of 4.75V-12V
3, on-board power indicator light, indicate power is turned
4, board size: 18.5 (mm) x10.5 (mm)
Rs19.00
Model: BE-000269
DESCRIPTION:
The Analog Test Board is an accessory board includes an onboard Audio Power Amplifier LM386M, and two high-precision adjustable resistor used for adjusting input voltage level (0-3.3V, 2 channel), and a speaker for indicating the output voltage level by sound volume (1 chan..
Rs864.00
Model: BE-000253
FEATURES:
Brand new and high quality.
Simply wrap strap around wrist and clip to a grounded source
Prevent Static shock in dry environment
Keep static from damaging electronic parts and equipments
Adjustable wrist strap with alligator clip tip
Inner conducting layer made of stainless..
Rs49.00
Out Of Stock
Model: BE-000194
DESCRIPTION:
Use LCD screen as display devices.
SPI interface, maximum limit save the I/O resources.
Specially added five rocker, convenient implementation structures, human-computer interaction interface, all the rest of the analog and digital interface with pin derivatio..
Rs1,149.00
Model: BE-001440
Ulink 2 Programmer Board:
Latest Upgraded version of the ULink emulator. Not only has the ULINK2 emulator all the features of ULINK, but also serial wire debug (SWD) support, Clock return support and features such as real-time agent. Conveniently carried out target hardware on-chip debugging (usi..
Rs1,999.00
Out Of Stock
Model: BE-000131
Product description:
Detail:
Color: White & Blue
Quantity: 1 pcs
Size(Except bracket): approx. 5 x 4.2 x 3.3 cm (H x L x W)
Input Voltage: AC / DC 12V
Max Load Current: 10A
Frequency..
Rs210.00
Model: BE-000601
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It has 16K bytes of In-System Programmable Flash Program memory with Read-While-Write capabilities, 512 bytes EEPROM, 1K byte SRAM. By executing powerful instructions in a single clock cycle, the ATm..
Rs279.00
Model: BE-001301
FEATURES:
Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 - 35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB (and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB, othe..
Rs278.00
