Search Criteria
Products meeting the search criteria
Out Of Stock
Model: BE-000382
DESCRIPTION:
Model: A2212
KV: 1400
MAX Efficiency: 80%
MAX Efficiency Current: 4-10A (>75%)
Current Capacity: 12A / 60s
No Load Current: 10 V : 0.4 A
Apply to the ESC: 30A.
Apply to the Lipo: 2 - 3S.
Apply to the NiCD / NiMH: 6 - 9S.
Shaft Diameter: 3.17mm
Weight: 50g ap..
Rs328.00
Model: BE-000383
DESCRIPTION:
Model:A2212
KV: 1800
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: φ27.5 x 30mm
Shaft Diameter: φ3.17mm
Weight: 48g
Rs375.00
Out Of Stock
Model: BE-000384
DESCRIPTION:
KV: 2200
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: φ27.5 x 30mm
Shaft Diameter: φ3.17mm
Weight: 48g
Rs345.00
Out Of Stock
Model: BE-000954
DESCRIPTION:
Model No.:A 2212 S
Rpm/V: 2700KV
Weight: 50g
Motor Dimensions: 27.7*26.3mm
Shaft Size: 3.17*37mm
Battery Opernating: 2-3 Lipo
Idle current: 1.8A
Load current: 18.5A
Power (Watt): 240
ESC(A): 30A. 20A
Ri(M î©): 0.03
Peak.Amps :14-22 A
Package Co..
Rs345.00
Hot
Model: BE-000450
The A3144E(US1881) is an integrated Hall effect latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A h..
Rs8.00
Model: BE-000398
DESCRIPTION:
Connect this device with lamp or home appliance in a series connection, then rotate the knob for dimming, speed, voltage, temperature control.
As the power has very big,so the normal home appliances or small factories enough to use.
This pressure regulator with two-way hi..
Rs183.00
Model: BE-000227
DESCRIPTION:
Step Down Module
Condition: New
With temperature protection, over current protection and short circuit protection, high and low voltage isolation, AC85 ~ 265 v wide voltage input, ac/dc current , 431 precision voltage stability DC5V output
Input voltage: AC 85 ~ 265 v 50/6..
Rs222.00
Model: BE-000049
ackage Include:
1x ACTIVE BUZZER DRIVER MODULE
Product description:
Feature:
Module using S8550 transistor drive
Operating Voltage 3.3V-5V
With fixed bolt hole for easy installation ..
Rs24.00
Out Of Stock
Model: BE-000423
DESCRIPTION:
Active buzzer with oscillation circuit built-in, the sound frequency is fixed but can only send out the voice of the single frequency.
The active buzzer work signal is DC
Rs11.00
Out Of Stock
Model: BE-000291
DESCRIPTION:
2 sine wave and 2 square wave output
AD9850 Frequency: 0-40MHz
After the 20-30MHz frequency harmonics increases, the waveform will become unclean.
Square Wave: 0-1MHz
Low-pass filter with 70MHz, so the waveform better than SN
Parallel and serial data input can be selecte..
Rs1,024.00
Out Of Stock
Model: BE-000245
FEATURES:
100% brand new & high quality
Quantity: 1 Pcs
Color:Blue
Size:68*22*18 mm
Intergrated fst ethernet for MAC,physical chip and transceiver inone chip
Supports 10Mb/s and 100Mb/s N-way auto-negetiation operation
Compliant to USB interface version 1.0/1.1
Full-speed(12M..
Rs161.00
Model: BE-000344
DESCRIPTION:
1. Working voltage: 5 VDC.
2. Working current: 10-15 mA.
3. Drive current: 100 mA.
4. Induction distance: 3-50 cm.
5. Size: 17 x 45 mm.
Connection: red take 5 V. green meet GND. yellow line output.
Through the sensors to adjust the knob on the back. induction ..
Rs137.00
Model: BE-000971
DESCRIPTION:
On-board ADXL345 digital output (supports I2C/SPI), low power, compact acceleration sensor;
Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop than the 1117, faster load the appropriate speed, ideal for high noise power environment;
The pin has been ..
Rs105.00
Out Of Stock
Model: BE-000455
Fits the CPU/RAM, Network and Power chips on the Raspberry Pi
Pre-applied thermally conductive adhesive makes installation simple
Help keep your Pi cool while overclocking
SIZE:
14mm(L) x 14mm(W) x 5mm(H) - 1PC
9mm(L) x 9mm(W) x 4mm(H) - 2PC
Rs379.00
Model: BE-000178
DESCRIPTION:
Sensitive material MQ135 gas sensor is used in clean air low conductivity tin oxide (SnO2). When the sensor is kept in their environment
In the polluting gases , the conductivity sensor with increasing air pollution in gas concentration increases. Using a simple circuit can chan..
Rs93.00
Model: BE-000321
DESCRIPTION:
AMS1117 3.3V power supply module
1, on-board AMS1117-3.3 chip
2, the input voltage range of 4.75V-12V
3, on-board power indicator light, indicate power is turned
4, board size: 18.5 (mm) x10.5 (mm)
Rs19.00
Out Of Stock
Model: BE-000252
FEATURES:
Supply voltage (Vin): DC5V ±5%
Current Consumption: 2mA (MAX 5mA)
Humidity measuring range: 20 to 95% RH.
Rs243.00
Model: BE-000269
DESCRIPTION:
The Analog Test Board is an accessory board includes an onboard Audio Power Amplifier LM386M, and two high-precision adjustable resistor used for adjusting input voltage level (0-3.3V, 2 channel), and a speaker for indicating the output voltage level by sound volume (1 chan..
Rs864.00
Model: BE-000253
FEATURES:
Brand new and high quality.
Simply wrap strap around wrist and clip to a grounded source
Prevent Static shock in dry environment
Keep static from damaging electronic parts and equipments
Adjustable wrist strap with alligator clip tip
Inner conducting layer made of stainless..
Rs49.00
Model: BE-000002
Product description:
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
It has total of four slots, can drive four A4988 stepper motor. Each stepper motor only need two IO ports. In other words, six IO ports can be well managed..
Rs101.00
Out Of Stock
Model: BE-000194
DESCRIPTION:
Use LCD screen as display devices.
SPI interface, maximum limit save the I/O resources.
Specially added five rocker, convenient implementation structures, human-computer interaction interface, all the rest of the analog and digital interface with pin derivatio..
Rs1,149.00
Out Of Stock
Model: BE-000117
DESCRIPTION:
Arduino LCD Keypad Shield
This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards.
Blue Backlight with white words
uses 4 Bit Arduino LCD Library
Left, Right, Up, Down and Select buttons
Screen ..
Rs179.00
Out Of Stock
Model: BE-000114
Package Include:
1X ATMEL ATmega328 CH340G BOARD with USB CABLE Free
Product description:
Main changes from the older version:
Add two rows of the holes for the pins. So it can be connected with normal Dupont lin..
Rs489.00
Model: BE-001440
Ulink 2 Programmer Board:
Latest Upgraded version of the ULink emulator. Not only has the ULINK2 emulator all the features of ULINK, but also serial wire debug (SWD) support, Clock return support and features such as real-time agent. Conveniently carried out target hardware on-chip debugging (usi..
Rs1,999.00
Out Of Stock
Model: BE-000966
DESCRIPTION:
This is a J-Link JTAG converter, it is a great item for your ARM Emulator . It also supports MINI2440, TQ2440 and other New Version and Popular ARM board It includes SWD 6PIN interface and SWD 4PIN port.
It is also compatible with sockets as follow :
20PIN Pitch = 2.54MM
20P..
Rs105.00