Menu
Your Cart

MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280

MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280
MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280
-7 %
MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280
MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280
MEGA2560 V2.0 SENSOR SHIELD FOR ARDUINO MEGA 2560 R3 1280
  • Stock: In Stock
  • Model: BE-000032
Rs380.00
Rs353.00
Ex Tax: Rs299.15
Product description:
 
The Arduino MEGA has many more I/O pins (54 Digital pins and 16 Analog pins)than a standard Arduino. This shield also has connectors specifically for some external devices like an SD Card, Radio communications (Bluetooth and others). It also has an option to power the "V" pins on all the Digital I/O 3-pin groups from an external power supply instead of the Arduino +5V. This is good for large numbers of servos etc. The "Analog" 3-pin groups still use the Arduino +5V which is better from an electrical noise perspective.

This version has two options of +5V supply to all the "V" pins:

  • Jumper on: +5 comes from the Arduino. Should be limited to about 300 ma
  • Jumper off: +5 (or other appropriate voltage) comes from an external supply connected to the blue terminal strip. External power Ground must also be connected to the blue terminal strip.


Using an external supply allows more current than the Arduino or Mega can supply, such as current for control of many servos or relays, and other attached devices. Usually this is +5V because most external devices require it. It is possible to use +6 volts if ALL the attached devices are the same such as Servos with that rating.
MEGA-SensorShieldV20-1024.jpg

INCLUDED: 

  • 1X MEGA2560 V2.0 SENSOR SHIELD 

NOT INCLUDED: 

  • atmega 2560 BOARD FOR Arduino Uno 

Package Include:
 
  • 1X MEGA2560 V2.0 SENSOR SHIELD 

Write a review

Please login or register to review