Nokia 5110 based Graphical LCD Display

DESCRIPTION:

This is LCD Graphics Display is straight forward to hook up and quick to get running with your Arduino or other microcontroller. At only 1.72' x 1.72', this display is easy to integrate into just about any project. The bright blue or white LED backlight illuminates the display from either edge.

FEATURES:

• 84 x 48 Pixels
• Bright LED Backlight
• SPI Serial Interface
• Duplicate solder pads on the top and bottom of the module
• 3.3V Logic and Power
• Extensive Graphics Library for Arduino available for download on the internet.

This module requires both 3.3VDC Power and uses 3.3V Logic - To interface this module with the 5 Volt Logic of an Arduino, we suggest our NTE4050B Non-Inverting Buffer Chip.

LCD module connection with Arduino (LCD pin – Arduino pin):

• RST – Pin 3
• CE – Pin 4
• D/C – Pin 5
• DIN – Pin 6
• CLK – Pin 7
• VCC – 3.3v
• LIGHT – Pin 13
• GND – GND