Menu
Your Cart

L293D Motor Driver Shield For Arduino And Others

L293D Motor Driver Shield For Arduino And Others
  • Stock: In Stock
  • Brand: xcluma
  • Model: BE-000112
  • Weight: 31.00g
  • MPN: BE-000112
Rs115.00
(GST +18%Extra)
Product description:
  • The shield contains two L293D motor drivers and one 74HC595 shift register.
  • The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers.
  • The output enable of the L293D is directly connected to PWM outputs of the Arduino.
  • The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.
Technical Specification: 
  • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (about 0.5% resolution) 
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. 
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V 
  • Pull down resistors keep motors disabled during power-up 
  • Big terminal block connectors to easily hook up wires (10-22AWG) and power 
  • Arduino reset button brought up top
  • 2-pin terminal block to connect external power, for seperate logic/motor supplies 
  • compatible with UNO,Mega, Diecimila, & Duemilanove
  • Dimensions: 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in)
Study Link..
Link1
https://learn.adafruit.com/downloads/pdf/adafruit-motor-shield.pdf
Link2
http://playground.arduino.cc/Main/AdafruitMotorShield
 
Package Include:
 
  • 1 x L293D MOTOR DRIVER SHIELD

Write a review

Please login or register to review