AC-DC 85-264V 220v To 12V 1A 12W Power Supply Module

 Description 

·        Easy installation, input and output can be welded 5.08 terminal or PIN to use.

·        Four corners have fixed mounting holes and fixed with anti-motion screws. The fixing hole diameter is 3.0mm.

·        Universal Input Voltage: 85-264V AC or 110-370V DC

·        The output and input are fully isolated from high and low voltages.

·        Overload protection, short circuit protection, temperature protection.

Specifications:

·        Input Voltage: 85-264V AC/110-370V DC

·        Input frequency: 47-63HZ

·        Voltage output: DC 12V

·        Output current: rated 1A/peak 2A

·        Output Power: 12W

·        Correct matching power supply to use

·        Choose a power supply, use 20% of the operation for the load. If you load only 80W, then at least 100W

·        The power supply can only be within the rated power, and the peak current is the overload capability of the power supply. It exceeds the peak current of the power supply implements voltage cut-off protection.

·        Please pay special attention to the power supply for the electric motor. Calculate the power supply according to the starting current of the motor.

·        Typically, the starting power of the motor 3-5 times the current of the motor. Usually, it is calculated by 3 times. if 10W use start it the power is between 30W and 50W, so when choosing a power supply, you must press more than 30W