DDS Signal Generator FG-100 LCD Display Sine Frequency 1HZ-500KHz Counter Function Signal Source Generator Meter

Description

·         FG-100 DDS Function generator is a low frequency signal generator

·         Small size, multiple functions, simple operation, easy to carry

·         Due to the good precision of DDS and frequency stability, is also very suitable for oscilloscope sweep time calibration factor

·         With an oscilloscope, which can be used in electronic circuit experiment and debugging, the frequency characteristics of audio amplifier and pulse response of test and measurement

·         With Filter Have a filter (can be turned on and off) that matches the output of the sine wave and pulse wave

Features:
• Due to the high and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
• The wave output is also suitable for oscilloscope attenuators and probe pulse adjustment
• The main output waveform are sine wave and wave, triangular wave, sawtooth wave
• Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave
• Small size, multiple functions, simple operation, easy to carry
• Made of high-quality material, durable and practical to use

Specifications:
• Item Type: Function Generator
• Material: ABS
• Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don’t care the phase noise and distortion, it can output full frequency range
• Resolution: 1Hz
• Output Waveforms: Sine wave, wave, triangular wave, forward sawtooth wave, reverse sawtooth wave
• Sinewave Distortion: 1% (frequency <1kHz); 0.5% (frequency >=1kHz)
• Output Amplitude: Maximum ±10V(P-P)
• Output Impedance: 50 ohm
• DC Offset: Maximum ±10V, can be disabled
• Internal Filter: For sinewave or pulse, can be turn on/off
Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended