Menu
Your Cart

ESP32-WROOM-32D 4MB - WiFi and Bluetooth module

ESP32-WROOM-32D 4MB - WiFi and Bluetooth module
  • Stock: In Stock
  • Brand: xcluma
  • Model: BE-002317
  • Weight: 3.00g
  • SKU: BE-002317
  • MPN: BE-002317
Rs235.00
(GST +18%Extra)

ESP32-WROOM-32D 4MB - WiFi and Bluetooth module

Processors:

CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 MHz and performing at up to 600 Dhrystone|DMIPS

Ultra low power (ULP) co-processor

Memory: 520 KiB SRAM

Wireless connectivity:

Wi-Fi: IEEE 802.11|802.11 b/g/n

Bluetooth: v4.2 BR/EDR and BLE

Peripheral interfaces:

12-bit successive approximation ADC|SAR ADC up to 18 channels

2 × 8-bit digital-to-analog converter|DACs

10 × touch sensors (capacitive sensing GPIOs)

Temperature sensor

4 × Serial Peripheral Interface Bus|SPI

2 × I²S interfaces

2 × I²C interfaces

3 × universal asynchronous receiver/transmitter|UART

Secure Digital|SD/Secure Digital#SDIO cards|SDIO/CE-ATA/MultiMediaCard|MMC/MultiMediaCard#eMMC|eMMC host controller

SDIO/SPI slave controller

Ethernet MAC interface with dedicated DMA and Precision Time Protocol|IEEE 1588 Precision Time Protocol support

CAN bus 2.0

Infrared remote controller (TX/RX, up to 8 channels)

Motor Pulse-width modulation|PWM

LED Pulse-width modulation|PWM (up to 16 channels)

Hall effect sensor

Ultra low power analog pre-amplifier

Security:

IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WLAN Authentication and Privacy Infrastructure|WAPI

Secure boot

Flash encryption

1024-bit OTP, up to 768-bit for customers

Cryptographic hardware acceleration: Advanced Encryption Standard|AES, SHA-2, RSA (cryptosystem)|RSA, elliptic curve cryptography (ECC), random number generator (RNG)

Power management:

Internal low-dropout regulator

Individual power domain for RTC

5uA deep sleep current

Wake up from GPIO interrupt, timer, ADC measurements, capacitive touch sensor interrupt

Write a review

Please login or register to review
We are Upgrading...
Sorry, We are currently closed and will reopen on the 21st of July. We apologize for any inconvenience this may cause.