Out Of Stock
5A 75W USB CC CV DC-DC LED DRIVE LITHIUM CHARGER STEP-DOWN MODULE
- Stock: Out Of Stock
- Model: BE-000063
- Weight: 35.00g
- MPN: BE-000063
Rs147.00
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.
Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm
11.Weight: 39g
Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.
2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)
3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
You may also like
0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the pro..
Rs205.00
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power su..
Rs102.00
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters:&nbs..
Rs775.00
12V/24V to 5V dual socket 3A DC-DC car charging lithium battery charging board charger module + protection dual functionProduct Information:DC-DC..
Rs119.00
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous..
Rs413.00
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
·  ..
Rs61.00
400W 15A Step-up Boost Converter LED Driver 8.5-50V to 10-60V Voltage Constant Current ModuleDescription:Module name :400W boost constant current modu..
Rs454.00
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, outpu..
Rs775.00
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A ..
Rs73.00
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are ..
Rs26.00
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX C..
Rs58.00
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car Charger
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging managemen..
Rs533.00
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection A..
Rs420.00
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range:6-40.00VOutput Power Range:0-160WOutput v..
Rs1,311.00
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not excee..
Rs17.00
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed..
Rs21.00
Input voltage: 6v-40v output voltage: 5v output current: 3a switching frequency: 150khz conversion efficiency: 92 percent working temperature: -40 to ..
Rs85.00
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v e..
Rs35.00
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, batt..
Rs322.00
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8m..
Rs604.00
Random Products
General Description:
The Intersil ICL7107 is high performance, low power, 3 1/2 digit A/D converters. Included are seven segment decoders, di..
Rs56.00
DESCRIPTION:
5 sections telescopic antenna aerial.
FEATURES:
Mainly used in television, radio, electric toy, remote control, lamps an..
Rs155.00
style="box-sizing: content-box; padding: 0px; margin: 0px;">Two independent PWM generators can set the frequency, duty cycle;The wide frequency ran..
Rs168.00
DESCRIPTION:
2.1 x 5.5mm CCTV Camera DC Power Plug Connector.
DC Power Plug with plastic construction and strain relief.
This 2.1 x 5.5mm Po..
Rs38.00
This is a DALY 4S 12V 20A common port BMS for LiFePo4 batteriesCharges, Discharge Protection Current, Voltage range are permanently programmed inside ..
Rs761.00
Samsung Galaxy Tab 10.1, is the world’s thinnest tablet, measuring 8.6 mm thickness, running with Android 3.0 Honeycomb OS on a 1GHz dual-core T..
Rs199.99
DESCRIPTION:
MQ-4 Sensor :
Sensitive material MQ-4 gas sensor is used to clean the air in the lower conductivity of tin dioxide (SnO2). When the..
Rs78.00
Model:50KTYZ Specifications: Color:black Voltage:220V AC Rotating Speed:2.5r/min 2.5 revolution per Minute Frequency:50Hz Power:6W Mainly used in..
Rs437.00
DESCRIPTION:
Brand new and high quality.
Support EM4001. 4100. or its compatible RFID. ID card.
Frequency: 125Khz.
Support Win..
Rs342.00
DESCRIPTION:
Generally used in system, panel box etc to keep the system cool.
SPECIFICATION:
Size: 3 × 3-inch (80 x 80 x 25mm)
DC:..
Rs84.00
DESCRIPTION:
ESP8266-12E is the enhanced version. in comparison with ESP8266-12.
It has the perfect the peripheral circuit. and can enhance the im..
Rs98.00
Aluminum GT2 16Teeth 5mm Bore Timing Belt Pulley Flange Synchronous Wheel for 3D PrintersDescription:- Material: Aluminum Alloy- Teeth: 16T; Bore: 5mm..
Rs40.00
DESCRIPTION:
Double Side Copper Prototype Pcb Universal Board for point to point DIY soldering.
SPECIFICATIONS:
Dimension: 4&nbs..
Rs23.00
• VK-172 automatically adapt the baud rate, the baud rate has any data output
• Supported operating systems: Windows 8/7/Vista/XP/CE
• Google Earth ..
Rs513.00
HL-340 New USB to RS232 COM Port Serial PDA 9 pin DB9 Adapter support Windows7-64Product features:USB TO SERIAL CONVERTER CALBE communicates with diff..
Rs100.00
Description
• This product is resistant to high temperature and stable,
used for GT2 timing belt fixing.
• Small size, convenient to use, easy to..
Rs38.00
DESCRIPTION:
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wren..
Rs15.00
TECHNICAL SPECIFICATIONS:
Size 40x40x3.75mm(WxDxH)
Imax 6A
Umax 12V
Qmx(ΔT=0) 60-71W
ΔT max =83° C
FEATURES:
No moving p..
Rs157.00
ESP32 ESP-32 for Wemos D1 WiFi Bluetooth 4MB Flash UNO D1 R32 Board Module CH340 CH340G Development BoardESP32 is already integrated antenna and RF ba..
Rs698.00
ESP32-WROOM-32D 16MB - WiFi and Bluetooth moduleProcessors:CPU: Xtensa dual-core (or single-core) 32-bit LX6 microprocessor, operating at 160 or 240 M..
Rs299.00