• Three charging current (0.3A, 0.5A, 0.8A) can be set through an external
• 2 resistors (0.3A, 0.5A) current setting resistor
• Set factory default 0.8A
• users can remove the resistor to change the current. For example, after removing 0.3A resistor and keep 0.5A resistor, then charging current is 0.5A
• 0.3A, 0.5A, 0.8A charging current
• Operating temperature: -25~85℃
• Use USB interface, convenient to use.
• Charging status LED lamp: red charging lamp; green lamp fully charged
• Suitable for 18650 lithium non-protection.