Out Of Stock
5A 75W USB CC CV DC-DC LED DRIVE LITHIUM CHARGER STEP-DOWN MODULE
- Stock: Out Of Stock
- Model: BE-000063
- Weight: 35.00g
- MPN: BE-000063
Rs147.00
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.
Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm
11.Weight: 39g
Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.
2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)
3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
You may also like
0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the pro..
Rs205.00
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power su..
Rs102.00
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters:&nbs..
Rs775.00
12V/24V to 5V dual socket 3A DC-DC car charging lithium battery charging board charger module + protection dual functionProduct Information:DC-DC..
Rs119.00
Hot
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous..
Rs413.00
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
· ..
Rs61.00
400W 15A Step-up Boost Converter LED Driver 8.5-50V to 10-60V Voltage Constant Current ModuleDescription:Module name :400W boost constant current modu..
Rs454.00
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, outpu..
Rs775.00
Out Of Stock
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A ..
Rs73.00
Hot
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are ..
Rs26.00
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX C..
Rs58.00
Out Of Stock
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car Charger
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging managemen..
Rs533.00
Out Of Stock
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection A..
Rs420.00
Out Of Stock
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range：6-40.00VOutput Power Range：0-160WOutput v..
Rs1,311.00
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not excee..
Rs17.00
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed..
Rs21.00
Hot
Input voltage: 6v-40v output voltage: 5v output current: 3a switching frequency: 150khz conversion efficiency: 92 percent working temperature: -40 to ..
Rs85.00
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v e..
Rs35.00
Out Of Stock
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, batt..
Rs322.00
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8m..
Rs604.00
Random Products
Out Of Stock
Product descriptionSpecificationsCH340G Replace ATMEGA16U2Micro controls: ATmega2560Operating Voltage:5VInput Voltage (recommended):7-12VInput Voltage..
Rs1,189.00
Description
·
This is the GT2-10mm Belt Width 20 Teeth 5mm Bore Timing Pulley.
· &nb..
Rs70.00
T8 leadscrew Brass Nut Pitch 2mm T8 Lead Screw Nut For CNC Parts 3D PrinterProduct Name: T Type Lead Screw NutMaterial: BrassDiameter: 8mmPi..
Rs58.00
Features - AT89S51
Compatible with MCS-51 Products
4K Bytes of In-System Reprogrammable Flash Memory
Fully Static Operation: 0 Hz to 33 MHz
..
Rs77.00
Single Side Copper Prototype Pcb Universal Board for point-to-point DIY solderingDimension: 12x18 cmMaterial: Single Side Copper PCBhole pitch: standa..
Rs45.00
MP1584 Adjustable 3A DC-DC Converter Step Down Voltage Regulator 1PcApplication:DIY mobile power, monitor power supply, power buggies, camera power su..
Rs70.00
Out Of Stock
Product descriptionFull integration on one board: Mega R3 ATmega2560 and WIFI ESP8266 with memory 4 Mt bytes (32Mt bit) . All of the modules can..
Rs1,299.00
Out Of Stock
FEATURES:
Onboard 'slot, support a variety of power supply.
Lead all IO, work user function extension.
Onboard a CP2102, work was debugging ..
Rs701.00
FEATURES:
Brand new and high quality.
Simply wrap strap around wrist and clip to a grounded source
Prevent Static shock in dry environment
..
Rs49.00
Product description:
The Arduino MEGA has many more I/O pins (54 Digital pins and 16 Analog pins)than a standard Arduino. This shiel..
Rs167.00
DESCRIPTION:
This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board. 5-wire phase can drive ordinary uln2003 chip can also b..
Rs120.00
Out Of Stock
FEATURES:
Inductance: 330uH
Inductance Tolerance: ± 10%
No. of Pins: 2..
Rs5.00
Out Of Stock
4WD Smart Robot Car Chassis Kits with Speed Encoder and Battery Box for UNO..
Rs545.00
Working Voltage: 3.5-5.5VWorking Current: <25mACompatible with PC, printer, car audio system DIYKY-012 3pin Active Buzzer Alarm Sensor Module..
Rs25.00
Out Of Stock
·
This is a DALY 7S 24V 40A common port
BMS for Li-Ion Batteries
· &..
Rs1,524.00
Out Of Stock
DESCRIPTION:
Official case for the Raspberry Pi from the Raspberry Pi Foundation
Removable Lid for easy access to the camera and display ports..
Rs85.00
DESCRIPTION:
Infrared receiving module adopts 1838 infrared receiving head Light resistance, strong electromagnetic interference, built-in in..
Rs30.00
Out Of Stock
DESCRIPTION:
Excellent environmental protection, insulation stable performance,low temperature shrinkage and fast shrinkage
It is widely u..
Rs50.00
Out Of Stock
Description ·
This is a 40 Tooth Extruder Drive durable drive parts used for MK7/ MK8
extruder,..
Rs33.00
Description
·
This kit comes with round shape chassis, Motors, wheels and all required
assembly parts t..
Rs515.00