- Supports high and low level trigger
- Emergency stop function
- Sleep mode, wake up with any button
- Automatically saves the parameters
- compatible with UART Set
- Continuously adjustable from 0.01 seconds to 9999 minutes
- a)Relay function selection: In the operation interface, shortly press STOP, the relay function is started or closed, 'ON' meets the conduction condition and the relay normally turns on, 'OFF' meets the conduction condition and the relay does not turn on; In the 'OFF' state, the system flashes 'OUT'.
- b)Parameters view: In the operation interface, short press SET to display the current parameter setting in the system, without affecting the system normal operation.
c)Display content switching: In the P-5 P-6 mode, switch display content (runtime/cycle times) by pressing DOWN.
- One way relay module, time delay power cut off, trigger delay cycle timer circuit switch.0.1 second (min) ~999 min (max) continuous tenable
- This product is simple and easy to use, powerful, but please buyers in detail to see the operation instructions of this product, very practical products.
- wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use.
- The interface is clear and simple, powerful, easy to understand, almost meet all your needs.
- There is one button emergency stop function (STOP key), with reverse connection protection, reverse connection without burning.
- increase the sleep mode and enable the operator to turn off the display automatically after 5 minutes without any operation.
- You can set different parameters of OP, CL and LOP, which are independent of each other.
- All set parameters automatically save