Menu
Your Cart

2S 7.4V 8.4V lithium battery protection board 3A current anti-overcharge

2S 7.4V 8.4V lithium battery protection board 3A current anti-overcharge
-46 %
2S 7.4V 8.4V lithium battery protection board 3A current anti-overcharge
  • Stock: In Stock
  • Model: BE-001362
  • Weight: 2.00g
Rs237.00
Rs128.00
Ex Tax: Rs108.47

DESCRIPTION:

The main IC uses the original "Seiko" imported components. With overcharge, over discharge, overcurrent, short circuit protection, for a variety of various shapes 3.7V lithium batteries. The use of Japan Seiko protection IC, VISHAY, AOS, IR and other high-quality MOSFET, FR-4low temperature coefficient plate, well-designed, comprehensive test.Small size, suitable for many requirements of high integration, low cost of the occasion, to meet a wide range of performance requirements to ensure that the battery pack is absolutely safe and reliable.

The lithium battery protection board properties:

Model: HX-2S-02 overcharge voltage range: 4.25-4.35v ± 0.05v

Size: 36 * 6 * 1.0mm Over discharge voltage range: 2.3-3.0v ± 0.05v

Maximum operating current: 3A Operating temperature: -40 --- +50 ℃

Maximum instantaneous current: 5A Storage conditions: -40-- +80 ℃

Quiescent current: less than 3uA Effective life: more than 50,000 hours

Internal resistance: less than 45mΩ Short circuit protection: can be protected, need to charge recovery

 The protection board size and device description;

 The protective plate size is 36 * 6 * 1.0mm

Welding point Description:

B + connected to the battery positive.

B - the battery negative;  

MB connects the battery 1 to the connection point before the battery 2.

P + connected to the charge / discharge side of the positive (charge side /discharge side shared); 

P - connect / discharge terminal negative ( shared with charge / discharge). 

Write a review

Please login or register to review