Out Of Stock
5A 75W USB CC CV DC-DC LED DRIVE LITHIUM CHARGER STEP-DOWN MODULE
- Stock: Out Of Stock
- Brand: xcluma
- Model: BE-000063
- Weight: 35.00g
- MPN: BE-000063
Rs147.00
(GST +18%Extra)
PRODUCT DESCRIPTION:
100% Brand new and high quality.
Highlights :
Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products.
Note:
1.When you use the product, the module inputs and outputs to be isolated from ground.
2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
3.Some customers report: “The module can not adjust the output voltage is always equal to the input voltage.” When you encounter this problem, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.
Specifications
1.Input voltage range:5-36VDC
2.Output voltage range:1.25-32VDC adjustable
3.Output current: 0-5A
4.Output power: 75W
5.High efficiency up to 96%
6.Built in thermal shutdown function
7.Built in current limit function
8.Built in output short protection function
9.Input reverse polarity protection: None (if required, high current diode in series with the input).
10.L x W x H =68.2×38.8×15mm
11.Weight: 39g
Application
1.Use as a step-down modules with overcurrent protection
Usage:
(1) Adjust the right button so that “OUT” LED lighted, Digital meter shows the value of output voltage ,adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A)
(3) Connected to the load.
2.Use as a battery charger
Usage:
(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)
(2)Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)
(3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined Charging current value.
(4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)
(5)connected to the battery charge.
(1,2,3,4 steps as: Output is unloaded, do not connect the battery)
3.Use as a LED constant current driver module
Usage:
(1)Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.
(2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the “current potentiometer” so that the output current reaches a predetermined LED operating current.
(3)Connect LED, work.
You may also like
0 to 20mA/40mA to 0-3.3V 0-5V 0-10V Current to Voltage Converter Signal Conversion Module 0-20mA 4-20mA I/V TransmitterProduct introduction:In the pro..
Rs205.00
This board adopts the principle of the common differential mode lc, which can suppress interference in the switching power supply or other dc power su..
Rs102.00
1200W high power DC-DC boost constant voltage constant current adjustable car charging power module Input DC10-60V output 12-83VModule parameters:&nbs..
Rs775.00
12V/24V to 5V dual socket 3A DC-DC car charging lithium battery charging board charger module + protection dual functionProduct Information:DC-DC..
Rs119.00
Hot
20A 300W DC Buck Module Constant Current Adjustable Step-Down Converter CC CV Power Module High Power Module Buck ConverterIntroduction to synchronous..
Rs413.00
Description
·
The output voltage can be set to 5V/8V/12V, the default is 12V
· ..
Rs61.00
400W 15A Step-up Boost Converter LED Driver 8.5-50V to 10-60V Voltage Constant Current ModuleDescription:Module name :400W boost constant current modu..
Rs454.00
4A 5.5-30V to 0.5-30VDC-DC with LCD Display Buck Boost Converter Automatic Adjustable Voltage Step Up DownFeatures:LCD input and output voltage, outpu..
Rs775.00
The DC-DC synchronous rectification step-down module has ultra-high conversion efficiency and low heat generationInput DC5.5~32V, stable output 5V 1A ..
Rs73.00
Hot
1, small size: 22 * 18 * 10cm almost all mobile power shell can be easily installed2, full-featured: The market known as the mobile power modules are ..
Rs26.00
Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-12V Output voltage: 5.1-5.2V Output current: 3A MAX C..
Rs58.00
Out Of Stock
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car Charger
8V - 35V Turn 5V 8A Power Supply Step-Down Module 4 Port USB Output Android Apple Mobile car ChargeFour-channel independent special charging managemen..
Rs533.00
Out Of Stock
Description The Power Supply For Whole Isolation Type Industrial-grade Built-in Power Supply Module, Temperature Protection, Over Current Protection A..
Rs420.00
Out Of Stock
Adjustable Step-down Module Voltage and Ammeter 32V5A 160W CNC DC Stabilized Power SupplyInput voltage range：6-40.00VOutput Power Range：0-160WOutput v..
Rs1,311.00
Description• Input: DC 4.5V--12V (input voltage must be higher than the output voltage to 1V or more.)• Output: 5V, (load current must not excee..
Rs17.00
Description
• Input: 4.5 V DC - 7 V (input voltage must be higher than the output
voltage)
• Output: 3.3 V, 800 mA (The load current may not exceed..
Rs21.00
Hot
Input voltage: 6v-40v output voltage: 5v output current: 3a switching frequency: 150khz conversion efficiency: 92 percent working temperature: -40 to ..
Rs85.00
One Channel input: DC 6V - 12V (input voltage must be output voltage higher than 1V or more.) Triple Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v e..
Rs35.00
Out Of Stock
DC-DC Power Supply Module 24V/12V to 5V 5A Converter 4 USB Fast ChargingThis module can be used for DIY modified cars, motorcycles, mobile power, batt..
Rs322.00
Input voltage: DC 3.5~30VOutput voltage: DC 0.8~29VOutput current: 10A (MAX)Conversion efficiency: 92%Blue digital display, the static current is 2-8m..
Rs604.00
Random Products
New
XM-18E XM18 Automatic Egg Incubator Controller Thermostat Temperature Humidity Incubator Sensor Six Incubation ModesOverview:The new generation intell..
Rs3,119.00
Out Of Stock
DESCRIPTION:
Balanced output line using 20AWG multi-beach silicone wire.
Main output line using high-quality 14AWG multi-beach silicone ..
Rs638.00
DESCRIPTION:
12V relay contact capacity 10A 250V, with optocoupler protection.
I / O port driver is active low. ..
Rs499.00
Out Of Stock
Product descriptionFeaturesFlexibility resistance, Better thermal conductivity.Power supply: 3.0V - 5.5VOperating temperature range:-55°C to +125°C (-..
Rs170.00
DescriptionHardware SpecificationsChipset: ESPRESSIF-ESP32-WROVER-B 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessorFLASH: QSPI 4MB Fla..
Rs1,019.00
Out Of Stock
DESCRIPTION:
A photoresistor or light dependent resistor (LDR) is a resistor whose resistance decreases with increasing incident light in..
Rs22.00
GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module High Precision I2CSpecifications:Measuring distance: 4 to 50..
Rs433.00
DESCRIPTION:
100% brand new
Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe
Voltage detection pricision: 0.01V..
Rs175.00
DESCRIPTION:
Sonoff and Slampher are smart WiFi Wireless products which will connect with your home appliances and lights by Wi-Fi, allowing you to..
Rs1,154.00
Out Of Stock
DESCRIPTION:
IC sockets are generally for preventing damage to IC's from soldering and while testing multiple circuits.These are made from Bl..
Rs3.00
DESCRIPTION:
1. Size: 37mmX45mmX8mm
2. the main chip: HB100
3. work voltage: DC 5V
4. HB100 is the use of microwave Doppler radar module (Doppler ..
Rs191.00
VL6180 VL6180X Range Finder Optical Ranging Sensor I2C Interface 3.3V 5V gesture recognitionFeatures:For the convenience of customers! The input volta..
Rs221.00
It is a perfect solution for those who want to make custom power cableThis CCTV Camera DC Power Connector will provide a great connectionInternal diam..
Rs24.00
DESCRIPTION:
Collector-Emitter Volt (Vceo): 60V
Collector Current (Ic): 1.0A
hfe: 40 @ 160mA
Power Dissipation (Ptot): 625mW
Current-Gai..
Rs6.00
Out Of Stock
The 74HC245 is identical in pinout to the LS245.
The device inputs are compatible with standard CMOS outputs; with pull-up resistors, they are comp..
Rs18.00
DESCRIPTION:
100% Branded And High Quality
Perfect For Arduino Shield Prototyping and Testing
Plastic Housing, Metal Contact Clips
Voltage..
Rs42.00
Features: 5A Over-current protection Sensor module uses current transformer to collect the AC signal to achieve the relay over-current signal output w..
Rs340.00
Features:
Low Power Transceiver for RS-485 and RS-422 Communications
Half-Duplex Operation
No Slew Rate Limitation, Operation up to 2.5Mbps
..
Rs10.00
DESCRIPTION:
This is brush motor controller
Suitable Voltage:36v
Match Motor:36V 350W
Protection:31.5±0.5V
Speed Regulator 1-4 V(Throttl..
Rs936.00